Stimmen - 2, Durchschnittliche Bewertung: 3.5
(
)
)
|
Anleitung Zusammenfassung
Press any key to turn the display back on. If pressing a key does not turn the display back on, two things might be the cause: • The brightness level might be too low. Press Fn-> to increase the brightness level. • The display device might be set to an external monitor. Press the display toggle hot key Fn-F5 to toggle the display back to the computer. Image is not full-screen. Make sure that the resolution is set to 1024x768. This is the native resolution of your computer display. Right-click on your Windows desktop and select Properties to bring up the Display Properties dialog box. Then click on the Settings tab to make sure that the resolution is set to the appropriate resolution. Resolutions lower than the specified resolution are not full-screen on the computer or on an external monitor. English EnglishEnglish 52 3 Troubleshooting my computer No audio is heard from the computer. Check the following: • The volume may be muted. In Windows, look at the volume control (speaker) icon on the taskbar. If it is crossed-out, click on the icon and deselect the Mute option. • The speakers may be turned off. Press Fn-F8 to turn the speakers on (this hot key also turns the speakers off). • The volume level may be too low. In Windows, look at the volume control icon on the taskbar. • If headphones, earphones or external speakers are connected to the line-out port on the computer’s right panel, the internal speakers automatically turn off. I want to eject the CD or DVD tray without turning on the power. I cannot eject the CD or DVD tray. There is a mechanical eject button on the optical drive. Simply insert the tip of a pen or paperclip and push to eject the tray. 53 The CD or DVD drive cannot access a disc. Check the following: • Make sure the disc is supported by the drive. If your computer connects to a CD-ROM drive, it can read CDs but cannot read DVDs. If your computer has a DVD drive, it can read DVDs in addition to CDs. • When placing the CD or DVD in the drive tray, make sure it is secure in the spindle on the drive tray. • Make sure the CD or DVD is free from scratches or smudges. If the CD or DVD is dirty, clean it using a disc cleaning kit. Remember to follow the instructions included with the kit. • If the problem does not lie with the disc, your CD or DVD drive may be dirty. Clean it using a drive cleaning kit. Follow the instructions included with the kit. The keyboard does not respond. Try attaching an external keyboard to the USB connector on the computer’s rear. If it works, contact your dealer or an authorized service center as the internal keyboard cable may be loose. The infrared port does not work. Check the following: • Make sure that the infrared ports of the two devices are facing each other (+/- 15 degrees) a maximum of 1 meter apart. • Make sure there is a clear path between the two infrared ports. Nothing should be blocking the ports. • Make sure you have the appropriate software running on both devices (for file transfers) or you have the appropriate drivers (for printing to an infrared printer). • During the POST, press F2 to access the BIOS Utility and verify that the infrared port is enabled. • Make sure both devices are IrDA-compliant. English EnglishEnglish 54 3 Troubleshooting my computer The printer does not work. Check the following: • Make sure that the printer is connected to a power outlet and that it is turned on. • Depending on your connection (USB or parallel), make sure that the printer cable is connected securely to the appropriate port on your computer and the corresponding port on the printer. • During POST, press F2 to access the BIOS Utility and verify that the parallel port is enabled if you use a parallel printer. I want to set up my location to use the internal modem. To properly use your communications software, you need to set up your location: 1 Click on Start, Control Panel. 2 Double-click on Phone and Modem Options. 3 Click on the Dialing Rules tab and begin setting up your location. Refer to Windows Help and Support. Troubleshooting tips This notebook computer incorporates an advanced design that delivers onscreen error message reports to help you solve problems. If the system reports an error message or an error symptom occurs, see “Troubleshooting tips” on page 54. If the problem cannot be resolved, contact your dealer. See “Troubleshooting tips” on page 54. 55 Error messages If you receive an error message, note the message and take the corrective action. The following table lists the error messages in alphabetical order together with the recommended course of action. Error Messages Corrective Action CMOS Battery Bad Contact your dealer or an authorized service center. CMOS Checksum Error Contact your dealer or an authorized service center. Disk Boot Failure Insert a system (bootable) diskette into the floppy drive (A:), then press Enter to reboot. Equipment Configuration Error Press F2 (during POST) to enter the BIOS Utility; then press Esc to exit and reco...