Stimmen - 2, Durchschnittliche Bewertung: 4 ( )

Hersteller: Fujitsu Dateigröße: 1.02 mb Dateiname: e632c85e-5a8b-489f-8874-fa63cdcc0fe0.pdf Unterrichtssprache:

E. Follow the usual steps to do scanning. F. After the scanning, close the “Auto-Connect Scanner” window. At this moment, Control Center will automatically do a disconnect. 4.8 USB Storage When you connect a USB storage, as in the following picture, a new disk will appear on your PC. If the USB storage is a flash drive, the new disk will be called a “removable disk”. You can see the storage icon in the system tray. Use the new disk as a regular disk. When you are ready to disconnect the disk, click the storage icon in the system tray and choose “Safely remove USB Mass Storage Device” to remove the USB storage, as the following figure. Open the Control Center, click the USB storage device and click the “Disconnect” button to disconnect the USB storage device. 4.9 Request to Connect If users always use auto-connect printer and network scanner, ENNUS1 server will automatically and properly do connect and disconnect. However, if a USB device is manually connected by a user, nobody else can connect and use that device. Therefore, we offer another mechanism called “Request to Connect” to solve this inconvenience. For example, there are two computers – TEST1 and TEST2. Now the owner of “HP Photosmart 2600” is TEST1. Then, the TEST2 computer wants to use this HP printer. The user on the TEST2 computer can click the “Request to Connect” button in the Control Center. The following window appears on TEST2. At this moment, the user on the TEST1 computer will see the following window, indicating that another computer – TEST2 is requesting to use the HP printer. The user can choose to accept or reject. If accepted, the Control Center on TEST1 will automatically disconnect the device and the Control Center on TEST2 will automatically connect that device. 4.10 Limitations There are some limitations for using the NetUSB technology. A. Only supports Windows® 2000 / XP / Server 2003 / Windows Vista™. Windows 98/ME is not supported. B. Only one PC can get the ownership of the same USB device at the same time. Chapter5 The Control Center This chapter describes how to use the Control Center. 5.1 Installing Control Center 1. Insert the included CD into the personal computer. The Autorun screen as in the following should appear. 2. Click Install Application button. 3. Click Next to continue through each installation step. 4. Click Finish. 5.2 Using the Control Center You can use the following tools to help you use the ENNUS1 server: .. Configure Server: go to the server’s web pages to configure the highlighted ENNUS1 server. .. Auto-Connect Printer: set auto-connect printer. Please refer to section 4.6 for details. .. Connect: connect a highlighted USB device. .. Disconnect: disconnect a highlighted USB device. .. Request to Connect: used to notify the owner of a USB device that you need the USB device. Please refer to section 4.9 for details. .. Network Scanner: actually this is auto-connect scanner. Please refer to section 4.7 for details. Note: You can also double-click on the highlighted ENNUS1 server to get the “Configure Server” function. 5.3 Quitting the Control Center The Control Center does not actually quit if you click the “X” box (close box) at the top right corner of the window. Instead, it just minimizes itself to the system tray. There are two ways to quit the Control Center. The first way is choosing “Exit” item in the “File” menu in the Control Center. The second way is right-clicking the icon of the Control Center in the system tray and choosing the “Exit” item. Chapter6 The ENNUS1 Server’s Web Pages 6.1 Introduction The ENNUS1 server runs the http server on TCP port: 80. Users may use the web pages to see the ENNUS1 Server’s system status and configure the ENNUS1 Server. 6.2 Using the ENNUS1 Server’s Web Pages 6.2.1 Displaying ENNUS1 Server Status Click on the “STATUS” icon to see system status and network status. 6.2.2 Setting up ENNUS1 Server Configuration To set up the ENNUS1 Server configuration, click on the “CONFIG” icon and then the system will request user to enter administrator (default: admin) and password (default: admin) to login. .. General Configuration .. Server Information: You have to set the Server Name, which is the name to represent the ENNUS1 Server. .. TCP/IP: You have to set the ENNUS1 Server’s TCP/IP configuration to connect TCP/IP network. Please see Chapter 3 Basic Installation for more details. .. Administrator: You can change administrator name and password. If you forget administrator name and password, you must perform Restore Factory Default action by plugging in the power adaptor while pressing the Init button. Please refer to the chapter “Restore Factory Defaults”. .. Administrator: enter your desired administrator name. .. New Password: enter your desired password. .. Re-type Password: re-confirm the password. .. Maintenance If you want to restore factory default values of the ENNUS1 Server or upgrade new firmware, you can use the Maintenance tool. .. Restart: click “Yes” button...

Herunterladen

Geben Sie zwei Ziffern: