Stimmen - 1, Durchschnittliche Bewertung: 5
(
)
)
|
Anleitung Zusammenfassung
35 Floppy Drive ................................................................................. 37 Introduction: About This Manual Introduction Introduction You are reading the AP2400R Server Reference Guide. This reference guide provides general and specific information about the AP2400R server. “About This Guide” contains an introduction on the contents of this document that include target audience, chapter description, and conventions used. It also lists the items included in the system package. About This Guide AP2400R Hardware Reference Guide Audience This guide is intended for experienced users and integrators with hardware knowledge of personal computers. Contents Description This reference guide contains the following parts: 1. Introduction: About This Guide This part contains an introduction on the contents of this document that include target audience, chapter description, and conventions used. It also lists the items included in the system package. 2. Chapter 1: System Overview This chapter describes the external features of the AP2400R server. It includes specific sections that identify these features. 3. Chapter 2: Basic Operation This chapter tells how to get started with the AP2400R server. The basic operation includes connecting the cables and powering on the system. 4. Chapter 3: Hardware Setup This chapter describes the hardware setup procedures that you have to perform when installing system components. It also gives detailed information on the internal components and how to install them. Introduction: About This Manual Conventions Symbols To make sure that you perform certain tasks properly, take note of the following symbols used throughout this guide. WARNING: Information to prevent injury to yourself when trying to complete a task. CAUTION: Information to prevent damage to the components when trying to complete a task. IMPORTANT: Information that you MUST follow to complete a task. NOTE: Tips and information to aid in completing a task. PHILIPS (CROSS) SCREW DRIVER: A tool required to install or remove the components in the server. STANDARD (FLAT) SCREW DRIVER: A tool required to install or remove the components in the server. AP2400R Hardware Reference Guide Package Contents This section lists the items included in the server package. If you are assembling the server by yourself, make sure to prepare all the server components before starting. It saves you a lot of time not having to hunt down components when you need them. The following checklist specifies the necessary components for the server. Standard Components Motherboard ASUS CUR-DLSR Chassis AR-20 2U Rackmount Chassis (19”) Power Supply 280W Redundant Floppy Drive Slim 1.44MB CD-ROM Drive ASUS 50x PCI Expansion Three 64-bit PCI slots Cables Internal SCSI, IDE, floppy S370 CPU Terminator For use in one processor configuration Rackmount Rails R-20 Rackmount Kit User’s Manuals server, motherboard, CD-ROM Optional Components RAID Controller ASUS PCI-DA2200 RAID controller Processor Dual Pentium® III up to 1GHz Memory Up to 4GB registered ECC SDRAM Hard Drive Up to six SCA-2 Ultra160 SCSI Introduction: About This Manual Chapter 1 Over view Chapter 1 Over view System This chapter describes the external features of the AP2400R server. It includes specific sections that identify these features. System Overview AP2400R Hardware Reference Guide Checklist Features The AP2400R is configured for the ASUS CUR-DLSR smart motherboard that uses the ServerSetTM chipset from ServerWorks®. The motherboard supports dual Pentium III processors to accelerate even the most complicated server tasks. The following are highlights to the server’s many features. For additional information, refer to the motherboard user’s manual that comes with the server package. Chassis: ASUS AR-20 • Chassis: 2U form factor that fits in a standard 19” rack • SCSI Backplane: Supports six SCSI hard drives using 80-pin SCA-2 connectors • Power: Redundant (dual) 280W power supplies equipped with two universal AC input and ATX-compliant output cables • Device Bays: Support for one 3.5” slim type floppy device, one 5.25” standard sized CD-ROM drive, and six 3.5” wide/1” high SCA SCSI hard disk drives in swappable trays Motherboard: ASUS CUR-DLSR • Processor: Dual Intel® Pentium III FC-PGA processors running up to 1GHz • Memory: Four 168-pin DIMM sockets that support up to 4GB PC133 registered SDRAM with ECC support • Onboard SCSI: LSI® 53C1010-33 dual-channel Ultra160 SCSI controller that supports up to 30 SCSI devices using two 68-pin Wide SCSI connectors • Onboard LAN: Dual Intel® 82559 Fast-Ethernet server controllers that supports 10BASE-T and 100BASE-TX, RJ-45 output • Onboard VGA: ATI® Rage XL VGA controller with 4MB PC100 SDRAM • Integrated Super I/O: PC97317 controller that supports one floppy, two serial ports, one printer port, two USB ports, one PS/ 2 keyboard, and one PS/2 mouse • Expansion Slot: Three 64-bit PCI slots on a riser card for full- length PCI expans...