Login:
Stimmen - 0, Durchschnittliche Bewertung: 0 ( )

Anleitung HP, modell HP Integrity NonStop J-Series

Hersteller: HP
Dateigröße: 375.01 kb
Dateiname:
Unterrichtssprache:en
Link zum kostenlosen Download Hinweise finden Sie am Ende der Seite



Dieses Gerät hat auch andere Anweisungen:

Anleitung Zusammenfassung


PN# DS41272, 608051-001
3.
If attaching the VT5900-SA to a server via a Fibre Chan-
VT5900-SA. Select menu option 2, “Change IP Subnet
nel HBA, verify that SCSI ID 7 is not in use by any
Mask” and type the IP subnet mask for the VT5900-SA.
devices being attached to the VT5900-SA. If ID 7 is used,
Select menu option 3, “Change IP Gateway” and type the
then set the Initiator ID to a value different from any
IP gateway for the VT5900-SA.
SCSI IDs already in use on the SCSI bus by the devices
(c) Select menu option X to exit this menu.
you are attaching to the VT5900-SA. Initiator ID “7" is
(d) Select menu option A to save your configuration
the default SCSI ID used on the VT5900-SA. To change
changes.
the Initiator ID:
(e) Reboot the VT5900-SA.
(a) Select menu option 4, “Parallel SCSI Configuration”.
2.
Enter the router IP address into the browser Address field
(b) Select menu option 1, “Edit Initiator Settings and Tar-
and press the Enter key.
get Settings”.
(c) Select menu option 2, “Select primary and select-
3.
In the Home page of the Visual Manager interface, select
enable alternate SCSI ID”.
“Ports” from the Main menu on the left.
(d) Select menu option 1, “Select primary SCSI Initiator
4.
When the security page appears, enter the appropriate
ID” and then type a SCSI ID (an integer value in the
user ID and password values and then select the
range of 0-15) that is not in use by any devices attached to
OK button. The default user name is ‘root’ and the
the VT5900-SA.
default password is ‘password’.
(e) Select menu option X to exit this menu. Continue to
5.
If you are using a switch, toggle Port Mode to the “N-
select menu option X to back out of the menus until you
Port” setting. When finished, select the Submit button.
reach the “Configuration Menu”.
(f) Select menu option A to save your configuration
6.
SCSI ID 7 is the default SCSI Initiator ID for each of the
changes.
VT5900-SA router's SCSI buses. If any devices attached
(g) Select menu option X to return to the main menu.
to a VT5900-SA router bus are using SCSI ID 7, then that
(h) Select menu option 4 to reboot the router and apply
bus's Initiator ID must be changed. To change a bus's Ini-
changes.
tiator ID: Select the desired bus from the router GUI or
the Ports submenu. Then use the primary Initiator ID
4.
To enable remote management capabilities, change the
field drop-down list to select an unused ID number. Click
Ethernet settings to “DHCP enabled” or enter a valid IP
the Submit button to record the change.
address and IP gateway so the VT5900-SA is configured
properly for network operation. Select menu option 2
7.
Reboot the router by selecting the Reboot menu option.
from the configuration menu to access Ethernet settings.
In about 30 seconds, the router will once again display
the Home page of the interface.
5.
Select the letter A to save your configuration changes to
the VT5900-SA. Once the VT5900-SA saves your con-
Note: Some older browsers will need to be manually returned
figuration changes, enter X to exit to the Main menu.
to the desired page after the reboot page counter has
6.
Select menu option 4 to reboot the VT5900-SA. In about
completed counting down to “0”.
30 seconds, the VT5900-SA will once again display the
main menu.
8.
If the router does not see all of the devices expected,
7.
If the VT5900-SA does not see all of the devices
repeat steps 4-6 above, and check that the initiator IDs are
expected, repeat steps 4-6 above, and check that the initi-
set to a unique value for the selected bus. Again, you
ator IDs are set to a unique value for the selected bus.
must submit any changes and reboot the router.
Again, you must save any changes and reboot the
VT5900-SA.
You have now successfully configured the SCSI portion of the
router. This procedure may not apply to all situations but does
You have now successfully configured the SCSI portion of the
address most key issues required for initial setup.
VT5900-SA. This procedure may not apply to all situations
but does address most key issues required for initial setup.
Option B: From the Visual Manager Interface
1.
Set the IP address using the serial interface.
(a) In the main menu of the serial interface, select menu
option 1, “Perform Configuration” and then menu option
2, “Ethernet and SNMP Configuration”.
(b1) To set the IP address dynamically, ensure that the
value for DHCP Configuration is “enabled”. If DHCP is
disabled, select menu option 7, “Toggle DHCP Configu-
ration”.
(b2) To set a specific IP address, select menu option 1,
“Change IP Address” and then type the IP address for the
5

...

Dieses Handbuch ist für folgende Modelle:
PC Desktops - HP NonStop G-Series (375.01 kb)
PC Desktops - HP NonStop L-Series (375.01 kb)

Bewertungen



Bewerten
Vorname:
Geben Sie zwei Ziffern:
capcha





Kategorien