Stimmen - 0, Durchschnittliche Bewertung: 0
(
)
)
|
Dieses Gerät hat auch andere Anweisungen:
Anleitung Zusammenfassung
Processor Option
Kit contents
•
Processor with installation tool
Installation Instructions
•
Heatsink
•
This document
for HP ProLiant BL460c Server Blades
Installing a processor
WARNING: To reduce the risk of personal
injury from hot surfaces, allow the drives
and the internal system components to cool
before touching them.
CAUTION: To avoid damage to the system board:
•
Do not touch the socket contacts.
•
Always install the processor socket cover after
removing the processor from the socket.
•
Do not tilt or slide the processor when lowering
the processor into the socket.
CAUTION: To avoid damage to the processor:
•
Handle the processor only by the edges.
•
Do not touch the bottom of the processor,
especially the contact area.
CAUTION: To prevent possible server malfunction
and damage to the equipment, multiprocessor
configurations must contain processors with the
same part number.
CAUTION: To prevent possible server blade
overheating, always populate processor socket 2
with a processor and a heatsink or a processor
cover and a heatsink blank.
CAUTION: The heatsink thermal interface media is
not reusable and must be replaced if the heatsink is
removed from the processor after it has been
installed.
IMPORTANT: When installing the heatsink, align
the guide pins on the processor retention bracket
with the alignment holes in the heatsink.
© Copyright 2006 Hewlett-Packard Development Company, L.P.
IMPORTANT: Processor socket 1 must always be
The information contained herein is subject to change without notice. The
populated. If processor socket 1 is empty, the server
only warranties for HP products and services are set forth in the express
blade does not power up.
warranty statements accompanying such products and services. Nothing
herein should be construed as constituting an additional warranty. HP shall
NOTE: Do not discard the processor protective
not be liable for technical or editorial errors or omissions contained herein.
cover. Always install the processor protective cover
if the processor is removed from the socket.
May 2006 (First Edition)
1. Power down the server blade.
Part Number 410958-001
2. Remove the server blade.
3. Remove the access panel.
4. Remove all hard drives and hard drive blanks.
...Dieses Handbuch ist für folgende Modelle:
PC Desktops - HP ProLiant xw460c Blade Workstation (545.55 kb)