Stimmen - 2, Durchschnittliche Bewertung: 5
(
)
)
|
Anleitung Zusammenfassung
The last chapter provides additional reference material on modem commands, safety, and regulatory information. © Copyright 2004, 2005 Hewlett-Packard Development Company, L.P. Microsoft and Windows are U.S. registered trademarks of Microsoft Corporation. The information contained herein is subject to change without notice. The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial errors or omissions contained herein. Reference Guide Compaq Notebook Series Second Edition April 2005 First Edition June 2004 Document Part Number: 370698-002 Contents Getting Started with Your Notebook Identifying Parts of the Notebook Components included with the notebook may vary by geographical region and the features you selected. The following tables identify the standard external components included with most notebook models. Front Panel and Right Panel Components 1 Main status lights (left to right): power mode, hard drive activity, and battery 6 Notebook open/close latch 2 TouchPad, scroll pad, Click buttons, and an on-off button 7 CD-ROM, DVD, or other drive 3 Power button: turns the notebook on and off 8 Battery pack 4 Keyboard status lights 9 Wireless on-off button and indicator light (select models only) 5 One-Touch buttons - Hard drive Left Panel and Back Panel Components 1 AC adapter jack 7 RJ-11 jack: connects the modem cable 2 Universal serial bus (USB) ports 8 PC Card and CardBus slot and button (select models only; location varies by model) 3 RJ-45 jack: connects a network cable 9 IEEE 1394 port (select models only) 4 S-Video out jack (select models only) - Audio jacks (left to right): external microphone, audio out (headphones) 5 External monitor port q Volume control 6 Cable lock slot (security connector) w Audio mute button and audio mute light Bottom Panel Components 1 Hard drive 4 Reset button 2 Battery latch 5 Mini PCI cover (no user parts inside) 3 RAM (memory) cover A CAUTION: To prevent an unresponsive system and the display of a warning message, install only a Mini PCI device authorized for use in your notebook by the governmental agency that regulates wireless devicesgin your country. If you install a device and then receive a warning message, remove the device to restore notebook functionality. Then contact Customer Care. Status Lights The notebook includes a number of status lights that report power and battery status, drive activity, and keyboard functions such as Caps Lock and Num Lock. The following diagram shows the main status lights on the front of the notebook. 1 Power mode ¦On: Notebook is on (even if the display is off). ¦Blinking: Notebook is in Standby. ¦Off: Notebook is off or in Hibernation. 2 Hard drive activity On: Notebook is accessing the hard drive. 3 Battery status ¦Green: Battery pack is fully charged. ¦Amber: Battery pack is charging. ¦Blinking: Battery pack has reached a low-battery condition. ¦Off: No AC power is applied, or AC power is applied with battery pack either close to full-charge capacity or not installed. The keyboard status lights, located above the keyboard, indicate the states of the keyboard locks. 1 Caps Lock On: Caps Lock is active. 2 Num Lock On: Num Lock is active. (The Keypad Lock must also be on to use the embedded keypad.) 3 Keypad Lock On: The embedded keypad is active (Fn+F8). Num Lock must also be on to activate the numeric keys. Otherwise, cursor control is active (as marked on an external keyboard). Setting Up Your Notebook A WARNING: To reduce the risk of serious injury, read the Safety & Comfort Guide. It describes proper workstation setup, posture, and health and work habits for computer users, and provides important electrical and mechanical safety information. This guide is located on the Web at and on the hard drive or on the Documentation CD that is included with the product. When you set up your notebook for the first time, you will connect the AC adapter, charge the battery pack, turn on the notebook, and run the Microsoft® Windows® Setup program. Step 1: Insert the Battery Pack A WARNING: Do not mutilate or puncture battery packs. Do not dispose of battery packs in fire, or they can burst or explode, releasing hazardous chemicals. Rechargeable battery packs must be recycled or disposed of properly. To install the battery pack: 1.Turn the notebook upside down. 2.Insert the connector end of the battery pack into the battery pack compartment, then slide the battery pack in until it latches. Step 2: Connect AC Power A CAUTION: Use only the AC adapter included with your notebook (or other approved adapter that meets the power requirements of the notebook). Using the wrong AC adapter could damage the notebook or adapter, cause data loss, and may void your warranty. 1.Plug the AC adapter into the notebook. 2.Connect th...
Dieses Handbuch ist für folgende Modelle:PC Desktops - 370698-002 (1.22 mb)