Stimmen - 0, Durchschnittliche Bewertung: 0
(
)
)
|
Dieses Gerät hat auch andere Anweisungen:
Anleitung Zusammenfassung
To set a strong password, use the following guidelines: • Have at least eight characters in length • Contain at least one alphabetic character and one numeric character • Not be your name or your user name • Not be a common word or a common name • Be significantly different from your previous passwords Besides the alphabetic characters (a-z) and numeric characters (0-9), the server also supports characters typed using special keys on the keyboard for a password. Refer to the help message on the screen when setting a password to determine the valid special characters. Setting, changing, or deleting a password This topic provides instructions on how to set, change, or delete a password in the Setup Utility program. To set, change, or delete a password in the Setup Utility program, do the following: 1. Start the Setup Utility program. See “Starting the Setup Utility program” on page 57. 2. On the Security menu, select Set Administrator Password to set an administrator password or select Set User Password to set a user password. Note: The Set User Password option is only available when you have already set an administrator password. Chapter 5. Configuring the server 67 3. See “Password considerations” on page 67. Then, follow the instructions on the screen to set or change a password. 4. If you want to delete a password, type your current password. Press Enter when you are prompted to type a new password. Then, press Enter to confirm the new password. The previous password will be cleared. Note: If you delete an administrator password, the user password will also be deleted. For security reasons, it is recommended that you always set a password for your server. 5. Press F10 to save settings and exit the Setup Utility program. If you have forgotten the password, you can use the Clear password jumper on the system board to erase the password. See “System board jumpers” on page 48. Then, set a new password for the server. Configuring the TPM function The TPM function provides a hardware security solution to encrypt data and protect the server. The TPM function is only available when there is a TPM module installed in your server. See “Installing the TPM module” on page 117. You can purchase a TPM module from Lenovo. After installing a TPM module, you need to check if the TPM function is enabled in the Setup Utility program. To enable the TPM function in the Setup Utility program, do the following: 1. Start the Setup Utility program. See “Starting the Setup Utility program” on page 57. 2. On the Security menu, select TPM Support. Make sure that the TPM Support is set to Enabled. 3. When the TPM Support is set to Enabled, the TPM State item is displayed. Set the TPM State to Enabled. 4. Press F10 to save settings and exit the Setup Utility program. The server will restart in order to enable the TPM function. Selecting a startup device If your server does not start up from a desired device such as the disc or hard disk drive as expected, do one of the following to select the startup device you want: Note: Not all discs, hard disk drives, or other removable devices are bootable. • To select a temporary startup device, do the following: Note: Selecting a startup device using the following method does not permanently change the startup sequence. 1. Turn on or restart your server. 2. When you see the logo screen, press F12 to display the boot menu. The boot device selection window opens. If your server is connected to a network and you want to start up the server from the network, press F10. 3. In the boot device selection window, use the up and down arrow keys on the keyboard to switch between the selections. Press Enter to select the device of your choice. Then, the server will start up from the selected device. • To view or permanently change the configured startup device sequence, do the following: 1. Start the Setup Utility program. See “Starting the Setup Utility program” on page 57. 2. On the Boot Options menu, follow the instructions on the screen to set the startup device for Boot Option #1 to Boot Option #5 depending on your needs. You also can set the boot priority for various devices. See “Boot Options menu” on page 64. 68 ThinkServer TS430 User Guide 3. Press F10 to save settings and exit the Setup Utility program. The server will follow the startup device sequence you have set each time you turn on the server. Exiting the Setup Utility program After you finish viewing or changing settings, press Esc to return to the Setup Utility program main interface. If you are on a nested submenu, press Esc repeatedly until you reach the main interface. Then, you can do one of the following: • If you want to save the new settings and exit the Setup Utility program, press F10. Otherwise, your changes will not be saved. • If you do not want to save the new settings, select Exit . Discard Changes and Exit. • If you want to return to the default settings, press F9 or select Exit . Load Default Values. For more information a...
Dieses Handbuch ist für folgende Modelle:PC Desktops - ThinkServer TS430 (0388) (10.47 mb)
PC Desktops - ThinkServer TS430 (0389) (10.47 mb)
PC Desktops - ThinkServer TS430 (0390) (10.47 mb)
PC Desktops - ThinkServer TS430 (0391) (10.47 mb)