Stimmen - 0, Durchschnittliche Bewertung: 0
(
)
)
|
Dieses Gerät hat auch andere Anweisungen:
Anleitung Zusammenfassung
PCI and PCI Express Cards Your computer supports a PS/2 serial-port adapter and provides the following slots for PCI Express and PCI cards: • One PCI Express x16 card slot (SLOT1) • Two PCI card slots (SLOT2, SLOT3) An optional riser card and riser card cage is available for the desktop computer. NOTE: For card slot locations, see "Mini Tower Computer System Board Components" on page 13 or "Desktop Computer System Board Components" on page 15. • If you are installing or replacing a card, follow the procedures in this section. • If you are removing but not replacing a card, see "Removing a PCI or PCI Express Card From a Mini Tower Computer" on page 30 or "Removing a PCI or PCI Express Card From a Desktop Computer" on page 35. • If you are removing a card, you must also remove the current driver for the card from the operating system. For instructions, see the documentation that came with the card. Cards • If you are installing a card, ensure that the appropriate driver for the card is also installed. For instructions, see the documentation that came with the card. Removing a PCI or PCI Express Card From a Mini Tower Computer 1 Follow the procedure in "Before Working on Your Computer" on page 9. 2 Remove the computer cover (see "Removing the Mini Tower Computer Cover" on page 19). 3 Gently push the release lever on the card retention latch to pivot the latch open. The latch remains in the open position. 1 2 3 4 5 1 alignment guides (4) 2 card 3 release lever 4 card slots (4) 5 card retention latch 4 If necessary, disconnect any cables connected to the card. 5 If you are removing the card permanently: a Install a filler bracket in the empty card-slot opening. Cards NOTE: Installing filler brackets in empty card-slot openings is necessary to maintain FCC certification of the computer. The brackets also keep dust and dirt out of your computer, and maintain the airflow that cools your computer. b Follow the procedure in "After Working on Your Computer" on page 17. c Uninstall the card’s driver. For instructions, see the documentation that came with the card. 6 If you removed a sound card: a Enter the system setup program, go to Onboard Devices and select Integrated Audio, and then change the setting to On. For more information on using the system setup program, see the Dell Technology Guide on your computer or at support.dell.com. b Connect external audio devices to the audio connectors on the back panel of the computer. For assistance with back panel connections, see your Setup and Quick Reference Guide. 7 If you removed an add-in network connector: a Enter the system setup program, go to Onboard Devices and select Integrated NIC, and then change the setting to On. For more information on using the system setup program, see the Dell Technology Guide on your computer or at support.dell.com. b Connect the network cable to the integrated connector on the back panel of the computer. For assistance with back panel connections, see your Setup and Quick Reference Guide. Installing or Replacing a PCI or PCI Express Card in a Mini Tower Computer NOTE: If you are replacing a card, uninstall the driver for the existing card. For instructions, see the documentation that came with the card. 1 Remove the computer cover (see "Removing the Mini Tower Computer Cover" on page 19). 2 Gently push the release lever on the card retention latch to pivot the latch open. The latch remains in the open position. Cards 1 2 3 4 6 7 5 1 alignment guide 2 card 3 card-edge connector 4 card connector 5 card slots (4) 6 release lever 7 card retention latch 3 If you are installing a new card, remove the filler bracket covering the empty card slot. To remove a filler bracket, gently insert a scribe under the top edge of the bracket. 4 If you are replacing a card that is already installed in the computer, remove the card. If necessary, disconnect any cables connected to the card. • For a PCI card, grasp the card by its top corners, and ease it out of its connector. • For a PCI Express card, pull the securing tab, grasp the card by its top corners, and ease it out of its connector. 5 If your card includes a card retention bar, remove the bar. Gently pull the securing tab, grasp the card by its top corners, and ease it out of its connector. 6 Prepare the new card for installation. Cards NOTE: For information on configuring the card, making internal connections, or customizing it for your computer, see the documentation that came with the card. WARNING: Some network adapters automatically start the computer when they are connected to a network. To guard against electrical shock, be sure to unplug your computer from its electrical outlet before installing any cards. 7 If you are installing the card into the PCI Express x16 card connector, position the card so that the securing slot is aligned with the securing tab, and gently pull the securing tab. 8 Place the card in the connector and press down firmly. Ensure that the card is fully seated in the slot...