Hersteller: Dell Dateigröße: 960.85 kb Dateiname: Unterrichtssprache:

Link zum kostenlosen Download Hinweise finden Sie am Ende der Seite

Press to expand or contract each of the main option fields. Option Field — This field contains information about each option. In this field you can view your current settings and make changes to your settings. Use the right- and left-arrow keys to highlight an option. Press to make that selection active. Key Functions — This field appears below the Option Field and lists keys and their functions within the active system setup field. NOTE: Depending on your computer and installed devices, the items listed in this section may not appear, or may not appear exactly as listed. System CPU Info Identifies whether the computer's processor supports Hyper-Threading and lists the processor bus speed, processor ID, clock speed, and L2 cache. Memory Info Indicates amount of installed memory, memory speed, channel mode (dual or single), and type of memory installed. Date/Time Displays current date and time settings. Boot Sequence The computer attempts to boot from the sequence of devices specified in this list. NOTE: If you insert a boot device and restart the computer, this option appears in the system setup menu. To boot from a USB memory device, select the USB device and move it so it becomes the first device in the list. Drives Diskette Drive Identifies and defines the floppy drive attached to the FLOPPY connector on the system board as Off, USB, Internal, or Read Only. Drives 0 through 1 Identifies the drives attached to the SATA or PRI IDE connectors on the system board, and lists the capacity for hard drives. SATA Operation Identifies and defines the SATA modes. You can set the SATA controller to Normal or Combo mode. Onboard Devices NIC Controller You can set the NIC to On (default), Off, or On w/ PXE. When the On w/ PXE setting is active (available only for the future boot process), the computer prompts the user to press . Pressing this key combination causes a menu to display that allows you to select a method for booting from a network server. If a boot routine is not available from the network server, the computer attempts to boot from the next device in the boot sequence list. Modem Enables or disables the onboard modem. 1394 Controller Enables of disables the IEEE 1394 connections. Card Reader Enables or disables the optional Flash Card Reader. Audio Controller Enables or disables the onboard audio controller. USB Controller Set to On (default) so that USB devices will be detected and supported in the operating system. The No Boot option enables a USB controller, but does not recognize a USB storage device. Serial Port Identifies and defines the serial port settings. Auto (default) automatically configures a connector to a particular designation (COM1 or COM3). NOTE: If both resources are in use, the port is disabled. Video Primary Video This setting specifies which video controller is primary when two video controllers are present on the computer. Video Memory Size Use this option to select 8 MB (default) or 1 MB of system memory for an integrated video controller. Performance HyperThreading If your computer's processor supports Hyper-Threading, this option appears in the Options List. HDD Acoustic Mode l Bypass — Your computer does not test or change the current acoustics mode setting. l Quiet (default) — The hard drive operates at its most quiet setting. l Suggested — The hard drive operates at the level suggested by the drive manufacturer. l Performance — The hard drive operates at its maximum speed. NOTE: Switching to performance mode may cause the drive to be noisier, but its performance is not affected. NOTE: Changing the acoustics setting does not alter your hard drive image. Security This section displays available system security options. Unlock Setup Use this option with Admin Password to unlock setup options. NOTE: This option appears only when the Admin Password option is enabled. Admin Password This option provides restricted access to the computer's system setup program in the same way that access to the system can be restricted with the System Password option. NOTE: To delete a password, enter the old password and press two times. System Password Displays the current status of the system's password security feature and allows a new system password to be assigned and verified. Password Changes This option locks the system password field with the setup password. When the field is locked, you can no longer disable password security by pressing when the computer starts. Power Management AC Recovery Determines what happens when AC power is restored to the computer. Auto Power On Sets the computer to automatically turn on. Choices are every day or every Monday through Friday. The default setting is Off. This feature does not work if you turn off your computer using a power strip or surge protector. Auto Power Time Sets time to automatically turn on the computer. Time is kept in a 24-hour format (hours:minutes). Change the start-up time by pressin...

Herunterladen

Geben Sie zwei Ziffern: