Login:
Stimmen - 3, Durchschnittliche Bewertung: 4.3 ( )

Anleitung Antec, modell PERFORMANCE II SERIES SX1000BII

Hersteller: Antec
Dateigröße: 136.28 kb
Dateiname:
Unterrichtssprache:en
Link zum kostenlosen Download Hinweise finden Sie am Ende der Seite



Anleitung Zusammenfassung


Install the fans so that the air is blowing into the case from the front. 1. Drop the fan into the fan bracket and push it in until it snaps in. 2. Connect a large 4-pin white connector from the power supply to the male 4-pin connector on each of the fans. Washable Air Filter Maintainence From time to time it will be necessary to wash the installed air filter. Not washing the air filter will result in higher system temperatures and possible stability problems. We recommend checking the air filter at least once a month initially. The frequency will change depending on system usage (users whose systems run 24/7 will likely have to check/wash more often than those who don't use their systems every day) and on environmental conditions. 4 Antec Quality Warranty Antec, Inc., warrants this or faulty components under I. Warranty Length Parts and labor are warranted for three Replacement products will be warranted for the remainder is longer. II. Who Is Protected This warranty is enforceable only by the original III. What Is And Is Not Covered It is important to note that our warranty is not an unconditional length of the warranty. Antec Products are made from the finest materials available under our exacting manufacturing standards. But, like any other product, they are not indestructible. Therefore, our warranty does not cover product damage that may abuse or mishandling of the products, nor does it cover incidental or Also, as with any product, it should be expected that component parts, moving etc. will show wear with use over time, and eventually may need to be refurbished replaced. This type of normal wear and tear is naturally not covered by our warranty, but we will always be happy to provide you with prompt, high-quality repair service at cost. All Antec products are covered by this 3 year warranty except keyboards, monitors and any product purchased before the inception of this warranty program which is November 1, 2000. The following are not covered by the warranty: 1. Any product on which the serial number has been defaced, modified, or removed. 2. Damage, deterioration or malfunction resulting from: a. Accident, abuse, misuse, neglect, fire, water, lightning, or other acts of nature, commercial or industrial use, unauthorized product modification, or failure to follow instructions included with the product. b. Repair or attempted repair by anyone not authorized by Antec, Inc. c. Any shipment damage (claims must be made with the carrier). d. Any other causes which do not relate to a product defect. 3. Cartons, cases, batteries, cabinets, tapes or accessories used with this product. 4. Antec, Inc. does not warrant that this product will meet your requirements. It is your responsibility to determine the suitability of this product for your purpose. 5. Removal or installation charges. 6. Shipping charges. 7. Any incidental charges. 7 IV. Exclusion Antec's sole obligation replacement of a Antec shall not, in to the purchaser or any but not limited to, damages liability in tort relating to V. Limitations Of Implied Warranties There are no other oral or written limited to those of merchantability or The duration of implied warranties is limited to the warranty VI. State Law And Your Warranty This warranty gives you specific legal rights. You may also have other rights granted under state law. These rights vary from state to state. VII. Warranty Registration It is not necessary to send anything to Antec, Inc. to register your products. In the event that warranty service is required, Antec, Inc. will request proof of purchase (detailed store receipt or invoice). VIII. For Warranty Service If the products need repair, return them to the dealer from whom you purchased the product. All products returned to Antec for warranty service must have prior approval, which your dealer can obtain by calling Antec, Inc. at (510) 770-1200. If the repair is required within the warranty period, enclose the proof of purchase with defective product and return it to the dealer. During the warranty period, your product will be repaired or replaced without charge, excluding shipping and handling. To return your product for service, package the product securely in its original packaging and ship it postpaid. Your dealer or Antec will not be responsible for damage due to shipping. Remember to enclose your proof of purchase and a clear description of the problem. IX. For Out-of-Warranty Service If the repair is required after the warranty period, there will be a charge for service and parts. Contact Antec, Inc. at (510) 770-1200 ext. 330 for a repair estimate on your out-of-warranty product. X. How To Call For Technical Support At Antec If you need help installing or troubleshooting a product call our Technical Support Voice Message System at 1-800-22-Antec (1-800-222-6832). Because Antec, Inc. wants to provide the convenient and comprehensive technical support our customers deserve, our policy is to return your call within one hour if ...

Dieses Handbuch ist für folgende Modelle:
PC Desktops - PERFORMANCE II SERIES SX1000II (136.28 kb)

Bewertungen



Bewerten
Vorname:
Geben Sie zwei Ziffern:
capcha





Kategorien