Stimmen - 2, Durchschnittliche Bewertung: 4
(
)
)
|
Anleitung Zusammenfassung
Other trademarks are the property of their respective holders. Part number: A00-1869 FCC Notice: This product has been certified to comply with the limits for a Class A computing device, pursuant to Subpart J of Part 15 of FCC Rules. It is designed to provide reasonable protection against radio or television communication interference in a commercial environment. Operation of this equipment in a residential area could cause interference with radio or television communication. Table of Contents Introduction to the IntraPort Enterprise-8 1 A NOTE ABOUT REMOTE CLIENT CONNECTIONS 1 INTRAPORT ENTERPRISE-8 INSTALLATION OVERVIEW 1 INTRAPORT ENTERPRISE-8 MANUAL OVERVIEW 2 Chapter 1 - Getting Started 3 A FEW NOTES 3 Please Read the Manuals 3 Warranty and Service 3 Getting Help with the IntraPort Enterprise-8 3 WHAT YOU WILL NEED TO GET STARTED 4 Supplied with the IntraPort Enterprise-8 4 Additional Items Needed for Installation 4 Chapter 2 - Mounting Instructions 5 PLACEMENT CONSIDERATIONS 5 SAFETY GUIDELINES 5 PARTS AND TOOLS 6 CHANGING THE POWER SUPPLY VOLTAGE SETTINGS 6 Installing Mounting Ears and Handles 7 Rack-Mount Brackets 8 Right Bracket Installation 9 Left Bracket Installation 10 Securing the Shelf 11 Moving the Unit into the Rack 12 Placing the Unit in an Equipment Rack 13 Securing the Unit to the Rack 14 Chapter 3 - Network Installation 15 PHYSICAL CONNECTION REQUIREMENTS 15 CONNECTING THE SERVER TO THE ETHERNET 16 CONNECTING A MANAGEMENT CONSOLE 17 POWERING UP THE SERVER 17 Power Alarm Information 17 Chapter 4 - CompatiView Software Installation 18 COMPATIVIEW FOR WINDOWS 18 System Requirements 18 Installation and Operation 18 Transport Protocols and CompatiView 19 Chapter 5 - Command Line Management 20 OUT-OF-BAND COMMAND LINE MANAGEMENT 20 TEMPORARILY RECONFIGURING A HOST FOR COMMAND LINE MANAGEMENT 20 SETTING UP TELNET OPERATION 21 Table of Contents Chapter 6 - Basic Configuration Guide 22 ETHERNET INTERFACE CONFIGURATION 22 IP Protocol 22 IP Settings for Setups in Parallel with a Firewall 22 IP Settings for Setups Behind a Firewall 23 IPX Protocol 24 Required for IPX 24 Suggested for IPX 24 AppleTalk Protocol 24 Required for AppleTalk 24 Suggested for AppleTalk 24 Configuring the Server for LAN-to-LAN Tunnels 24 Required for LAN-to-LAN Tunnel Configurations 24 Suggested for LAN-to-LAN Tunnel Configurations 24 Configuring the Server for IP and IPX Client Tunnels 25 Required for Client Tunnel Configurations 25 Suggested for Client Tunnel Configurations 25 VPN User Database 25 Setting up RADIUS Authentication 26 Setting the IntraPort Enterprise-8 for a RADIUS Server 26 RADIUS Server User Authentication Settings 26 Setting up SecurID Authentication 27 Setting the IntraPort Enterprise-8 for an ACE/Server 27 ACE/Server Settings 27 SAVING A CONFIGURATION FILE TO FLASH ROM 28 Chapter 7 - Shipping Defaults 29 DEFAULT PASSWORD 29 ETHERNET INTERFACES 29 IP Defaults 29 IPX Defaults 29 AppleTalk Defaults 29 Chapter 8 - LED Patterns and Test Switch Settings 30 INTRAPORT ENTERPRISE-8 LED PATTERNS 30 Over Temp 30 Sys Ready 30 General Indicators 30 Ethernet Traffic Indicators 30 Load % Indicators 30 INTRAPORT ENTERPRISE-8 SWITCH SETTINGS 31 Appendix A - Connector and Cable Pin Outs 32 PIN OUTS FOR DB-25 MALE TO DB-25 FEMALE CONSOLE CABLE 32 ii Table of Contents Appendix B - Downloading Software From Compatible Systems 33 Appendix C - Security Dynamics ACE/Server Information 34 Appendix D - Adding or Replacing RIOP Cards 35 Appendix E - When the “Over Temp” Light Comes On 36 REPLACING OR CLEANING THE INTRAPORT ENTERPRISE-8 AIR FILTER 36 Appendix F - Terms and Conditions 37 Table of Contents Figure 1. Location of Voltage Switch on the Power Supply 6 Figure 2. Installing Mounting Ears and Handles for a Standard Equipment Rack 7 Figure 2.1. Installing Mounting Ears for a Telco Rack 7 Figure 3. Rack-Mount Brackets 8 Figure 4. Fastening the Right Bracket to the Rack 9 Figure 5. Fastening the Left Bracket to the Rack 10 Figure 6. Lowering the Shelf 11 Figure 6.1. Securing the Shelf 11 Figure 7. Moving the Unit into a Standard Equipment Rack 12 Figure 7.1. Moving the Unit into a Telco Rack 12 Figure 8. Placing the Unit in a Standard Equipment Rack 13 Figure 8.1. Placing the Unit in a Telco Rack 13 Figure 9. Securing the Unit to the Rack 14 Figure 10. IntraPort Enterprise-8 VPN Access Server 15 Figure 11. Detail of RIOP Cards 16 Figure 12. Detail of Power Units 17 Figure 13. Removing and Replacing an RIOP Card or Cover Plate 35 Figure 14. Removing the Filter Cover Plate 36 Introduction to the IntraPort Enterprise-8 Introduction to the IntraPort Enterprise-8 Congratulations on your purchase of the IntraPort Enterprise-8 VPN Access Server. The IntraPort Enterprise-8 supports up to 512 LAN-to-LAN tunnels and up to 40,000 simultaneous remote client connections. In addition, it offers DES and 3DES encryption using built-in hardware coprocessors. A Note About Remote Client Connections In order to create a tunnel to a network over ...
Dieses Handbuch ist für folgende Modelle:PC Desktops - IntraPort Enterprise-8 (1.37 mb)