Hersteller: Lenovo
Dateigröße: 4.4 mb
Dateiname:
|
Dieses Gerät hat auch andere Anweisungen:
Anleitung Zusammenfassung
Wireless keyboard and mouse
configuration
Computer instructions
The wireless keyboard and mouse are pre-synchronized, for your
convenience, to work with your Lenovo PC. The keyboard and mouse
Notes:
should work immediately after you install the batteries, and then turn on
1) When establishing a wireless connection, it is recommended to
Built-in microphone
the mouse and keyboard.
keep the distance from the keyboard/mouse to the computer less
Camera
than 25 cm (10 inches)
1. Install the batteries.
2) The effective working distance of the wireless keyboard and
Indicator lights ON/OFF button
Close
mouse is 10 m (33 feet) (depending on the computer's working
Volume down
Put 2 AA
environment).
batteries in the
Volume up
keyboard's
2 AA batteries
If the wireless device does not work, do the following:
Brightness down
battery
Battery
Put 2 AA batteries in the battery
1. Be sure there is no physical obstacle between the wireless device
Brightness up
compartment.
compartment
compartment, making sure the
and the computer.
position of the polarities is
LCD On/Off
identical to the image.
2. Restart the computer, and verify that the system devices are
functional.
2. Turn on the power switch.
3. Repeat the procedure for establishing a Bluetooth connection.
Turn on the mouse power switch.
4. Replace the batteries.
5. Do not place the computer under a metal surface or table.
If you do not plan
to use the mouse
6. Make sure there are no electronic devices close by, such as
for a long time, turn
speakers, remote controls of electronic toys or mobiles, which
off the mouse
power switch to
might create high electromagnetic fields that could interrupt the
After installing the batteries, turn on the
save battery life.
1 — Optical drive
wireless connection.
power switch on the side of the keyboard.
7. Place the keyboard, mouse and remote control the right way up.
2 — Power button
You may need to manually synchronize the wireless keyboard or mouse
8. Remove the batteries from the keyboard, mouse and remote
3 — Card reader
if they are not functioning.
control if you do not plan to use them for a long time.
4 — USB ports (2)
To synchronize them, do the following:
9. If the batteries in the keyboard, mouse or remote control leak,
5 — Headphone connector
1. Press the wireless connect button.
clean the battery compartments as soon as possible and insert
6 — Microphone connector
new batteries.
2
3
Press the
10. Use batteries of good quality to ensure the proper function.
wireless
4
5
11. When battery power becomes low, the battery indicator light on
6
1
connect buttons
on the back of
the keyboard will change from orange to red.
connect
the keyboard
and mouse.
2. Make sure the indicator lights blink and press the wireless reset button.
7 — AV-IN connector
(Selected models only)
8 — PS/2 Keyboard connector
When the keyboard and
mouse wireless indicator
When the battery indicator light blinks
When the battery indicator light blinks white,
9 — Ethernet connector
lights blink white, press
red, it means that the battery power
it means that the keyboard or mouse is
7
14
and hold the wireless reset
becomes low.
being connected.
8
10 — USB ports (2)
button for over 5 seconds
9
until the indicator lights of
10
11 — TV-Tuner connector
the keyboard and mouse
11
(Selected models only)
turned off.
13
LVT
LVT :
12
12 — eSATA port
After entering Windows, press this key to
13 — Wireless reset button
launch the LVT (Lenovo Vantage
Technology) program, Lenovo's
14 — Power connector
pre-loaded Home PC software. In addition
to its own functions, the LVT program will
allow you to start other Windows
compatible software, specially configured
If connection is not established successfully, refer to "Wireless keyboard and
to run on this model of computer.
mouse instructions" in the User Guide.
31044806_IC_B5_QR_V2.0_(EN)(R).indd 2
2010-7-21 14:23:15