Stimmen - 0, Durchschnittliche Bewertung: 0
(
)
)
|
Anleitung Zusammenfassung
Wireless keyboard and mouse
configuration
Computer instructions
Method A
1. Install the batteries.
2. Turn on the power switch.
Built-in microphone
Camera
Close
Turn on the mouse power switch.
Put 2 AA
If you do not plan to
batteries in the
Wireless reset button (or
use the mouse for a
keyboard's
2 AA batteries
long time, turn off
Indicator lights ON/OFF button)
battery
Battery
Put 2 AA batteries in the battery
the mouse power
Volume down
compartment.
compartment compartment, making sure the
switch to save
position of the polarities is
battery life.
Volume up
After installing the batteries, turn on the power
identical to the image.
switch on the side of the keyboard.
Brightness down
Brightness up
3. Press the wireless connect button.
4. Make sure the indicator lights blink and then turn on the computer.
LCD On/Off
ATE
OFF ST
2 AA batteries
1
While the computer is turned off, press the wireless connect button
Optical drive
on the back of the keyboard and mouse.
2
Power button
3
Card reader
5. Establish the wireless connection automatically.
4
USB ports (2)
5
Headphone connector
6
Microphone connector
When the keyboard and mouse wireless
2
Once the wireless connection is successfully established,
the indicator lights on the keyboard and mouse will turn off
indicator lights blink white, turn the
3
and they will work properly.
computer on within 30 seconds to
5
establish a wireless connection.
4
6
1
If the wireless keyboard and mouse fail to connect according to method
Notes:
7
AV-IN connector (Selected
A, follow method B:
1) When establishing a wireless connection, it is recommended to keep the distance
models only)
from the keyboard/mouse to the computer less than 25 cm (10 inches)
8
PS/2 Keyboard connector
2) The effective working distance of the wireless keyboard and mouse is 10 m (33
Method B
7
9
Ethernet connector
feet) (depending on the computer's working environment).
12
1. Make sure the indicator lights blink.
8
10
If the wireless device does not work, do the following:
USB ports (2)
9
1. Be sure there is no physical obstacle between the wireless device and the
10
11
TV-Tuner connector (Selected
Make sure the wireless indicator
11
computer.
models only)
lights still blink. If they stop
blinking, press the connect button
2. Restart the computer, and verify that the system devices are functional.
12
Power connector
on the back of keyboard and
3. Repeat the procedure for establishing a Bluetooth connection.
mouse again.
4. Replace the batteries.
5. Do not place the computer under a metal surface or table.
6. Make sure there are no electronic devices close by, such as speakers, remote
2. Press the wireless reset button until wireless connection established.
controls of electronic toys or mobiles, which might create high electromagnetic
To establish the wireless connection, press and hold
the wireless reset button for over 5 seconds until you
fields that could interrupt the wireless connection.
hear multiple beep sounds.
7. Place the keyboard, mouse and remote control the right way up.
The wireless reset button is a touch button located
8. Remove the batteries from the keyboard, mouse and remote control if you do not
at the bottom-right-side of the screen, as shown in the
When the battery indicator light blinks red, it
When the battery indicator light blinks white, it means
diagram. Before following the reset instructions,
plan to use them for a long time.
means that the battery power becomes low.
that the keyboard or mouse is being connected.
make sure the indicator light is ON. Press on any of
9. If the batteries in the keyboard, mouse or remote control leak, clean the battery
the touch buttons ONCE to turn the indicator light ON
LVT
to activate the buttons.
compartments as soon as possible and insert new batteries.
LVT :
10. Use batteries of good quality to ensure the proper functioning of the remote control.
After entering Windows, press this key to launch the LVT (Lenovo Vantage
Technology) program, Lenovo's pre-loaded Home PC software. In addition to its
11. When battery power becomes low, the battery indicator light on the keyboard will
If connection is not established successfully, refer to "Wireless keyboard and
own functions, the LVT program will allow you to start other Windows
mouse instructions" in the User Guide.
change from orange to red.
compatible software, specially configured to run on this model of computer.