Do not attempt to open or service the battery. NOTICE The information in this card is subject to change without notice. COMPAQ COMPUTER CORPORATION SHALL NOT BE LIABLE FOR TECHNICAL OR EDITORIAL ERRORS OR OMISSIONS CONTAINED HEREIN; NOR FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES RESULTING FROM THE FURNISHING, PERFORMANCE, OR USE OF THIS MATERIAL. This card contains information protected by copyright. No part of this card may be photocopied or reproduced in any form without prior written consent

Before you perform any restore or backup tasks, we recommend that you create an Emergency Diskette. Creating an Emergency Diskette 1. Insert your Compaq Recovery CD into your CD-ROM, CD-RW, or DVD-ROM drive. 2. Turn off your computer by clicking the Start button; click on Shut Down. The Shut Down Windows pop-up box is displayed. 3. Select the Shut down radio button. 4. Click OK. The system powers down. 5. Turn on your computer by pressing the power button on the front of your computer. The syste

*This system may require upgraded and/or separately purchased hardware and/or a DVD drive to install the Windows 7 software and take full advantage of Windows 7 functionality. See for details. Windows 7 Business disk may be included for future upgrade if desired. To qualify for this downgrade an end user must be a business (including governmental or educational institutions) and is expected to order at least 25 customer systems with the DA - 13524 Worldwide — Version 5 — February 3, 2010 Page 32

SCSI Problems Some common causes and solutions for SCSI device problems are listed in the following table. Table 4-10 Solutions for SCSI Problems Problem Possible Solution System will not boot from a SCSI drive. Be sure that drive cabling and jumpers are set correctly. To boot to a SCSI drive, the drive with the lowest SCSI number will be the boot drive. No two drives can have the same SCSI number. See Figures 6-3, 6-4, and 6-5 for instructions on selecting SCSI ID. Compaq Professional Workstati

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Overview Product Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 System Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Package Contents. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Specifications. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

COMPAQ, the Compaq logo, and Presario Registered U.S. Patent and Trademark Office. All other product names mentioned herein may be trademarks or registered trademarks of their respective companies. First Edition November 2000. s 7 line! 221490-371

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1 Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 Package Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 Technical Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . .2 Hardware installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5 Driver i

You may be prompted to insert your Windows installation CD. If so, insert the CD into your CD-ROM drive, and continue the installation process as prompted. 16. Click “Finish” to complete installation of the Ethernet driver. 17. The “Add New Hardware Wizard” will now locate a second “generic USB Hub on USB 2.0 Bus”. Click “Next”. 18. Select “Search for the best driver for your device (Recommended)”. Click “Next”. 19. Remove the check marks from all available options, then click “Next”. 20. The “A

Important Note: You may find two “Universal Serial Bus Controller” entries in the Device Manager list. If so, you will need to search both lists to locate all DockStation entry listings. 11 P74321ea_F5U216_manual_uk 02-06-2003 15:59 Page 12 DRIVER INSTALLATION Windows 2000 Note: Do not connect the DockStation to your computer’s USB port until instructed to do so. 1. Insert the Belkin installation CD into your CD-ROM drive. 2. After a few moments the CD will auto-start. Click the “Install Driver”

Plugging and unplugging cables while servers are powered on may cause irreversible damage of the servers and/or the LCD Rack Console. Belkin is not responsible for damage caused in this way. You are now ready to begin installation of your LCD Rack Console. The following sections (pages 11–13) provide complete instructions for the hardware setup of a single LCD Rack Console (F1DC108C-US, F1DC116C-US). 1 2 3 4 5 6 7 8 section 11 Installation Connecting Servers to the LCD Rack Console (PS/2 Connect