Before you perform any restore or backup tasks, we recommend that you create an Emergency Diskette. Creating an Emergency Diskette 1. Insert your Compaq Recovery CD into your CD-ROM, CD-RW, or DVD-ROM drive. 2. Turn off your computer by clicking the Start button; click on Shut Down. The Shut Down Windows pop-up box is displayed. 3. Select the Shut down radio button. 4. Click OK. The system powers down. 5. Turn on your computer by pressing the power button on the front of your computer. The syste

They must be 16 inches apart horizontally, and level. Standard stud spacing in the wall is 16 inches (C). 2. Attach bracket to wall using the proper screws (A) (not provided). 3. Attach panel (B) to bracket with screws provided (2). NOTE: -The mounting holes on the bracket are spaced 16 inches apart to allow attachment to the wall studs. -For best results, locate the wall studs and screw directly into them. -If there are no studs available, make sure to use a high-strength anchor in wallboa

Pase el cable alrededor de cualquier objeto inmovible o use la placa de aseguramiento incluida en el paquete. 2. Localice la ranura de seguridad en la parte lateral o la parte trasera de su computadora tipo cuaderno*. 3. Sujete el cuerpo del candado e insertelo en la ranura de seguridad. La patilla de oro en la parte trasera del candado va sobresalir ligeramente y luego se embragara. Gire los numeros de combinacion a un numero arbitrario para asegurar el candado. *El cable tambien se puede usar

4 Instrucciones para el candado combinado Instrucciones para el candado combinado Para cerrar: 1. Pase el cable alrededor de cualquier objeto inmovible o use la placa de aseguramiento incluida en el paquete. 2. Localice la ranura de seguridad en la parte lateral o la parte trasera de su computadora tipo cuaderno*. 3. Sujete el cuerpo del candado e insertelo en la ranura de seguridad. La patilla de oro en la parte trasera del candado va sobresalir ligeramente y luego se embragara. Gire los numero

They must be 16 inches apart horizontally, and level. Standard stud spacing in the wall is 16 inches (C). 2. Attach bracket to wall using the proper screws (A) (not provided). 3. Attach panel (B) to bracket with screws provided (2). NOTE: -The mounting holes on the bracket are spaced 16 inches apart to allow attachment to the wall studs. -For best results, locate the wall studs and screw directly into them. -If there are no studs available, make sure to use a high-strength anchor in wallboa

They must be 16 inches apart horizontally, and level. Standard stud spacing in the wall is 16 inches (C). 2. Attach bracket to wall using the proper screws (A) (not provided). 3. Attach panel (B) to bracket with screws provided (2). NOTE: -The mounting holes on the bracket are spaced 16 inches apart to allow attachment to the wall studs. -For best results, locate the wall studs and screw directly into them. -If there are no studs available, make sure to use a high-strength anchor in wallboa

INSTRUCTION SHEET- F4D517 SLIDING KEYBOARD SHELF WITH MOUSE TRAY INSTRUCTIONS : 1. Remove sliding tray (4) by gently pulling drawer slides apart. 2. Attach shelf (1) to rack using the provided screws (2). 3. Install sliding tray (4) by gently pushing drawer slides together. 4. Mouse tray can slide out the left or right side. 5. Route mouse cord through opening in rear of sliding tray (4). BELKIN TOOLS NEEDED: Parts List #2 Phillips screwdriver ITEM QTY DESCRIPTION 1 1 Keyboard Tra