Stimmen - 2, Durchschnittliche Bewertung: 3.5
(
)
)
|
Anleitung Zusammenfassung
¦ Purpose of this manual and target readers This manual explains functions of SOFTUNE Workbench. This manual is intended for engineers designing several kinds of products using SOFTUNE Workbench. Other company names and products names are trademarks or registered trademarks of their respective companies. ¦ Trademarks REALOS, SOFTUNE are trademark of Fujitsu Semiconductor Limited, Japan. Note: F2MC is the abbreviation of FUJITSU Flexible Microcontroller. Microsoft, Windows and Windows Media are either registered trademarks of Microsoft Corporation in the United States and/or other countries. The company names and brand names herein are the trademarks or registered trademarks of their respective owners. ¦ Organization of This Manual This manual consists of the following 2 chapters. CHAPTER 1 BASIC FUNCTIONS This chapter describes the basic functions on the SOFTUNE Workbench. CHAPTER 2 DEPENDENCE FUNCTIONS This chapter describes the functions dependent on each Debugger. i • • • The information, such as descriptions of function and application circuit examples, in this document are presented solely for the purpose of reference to show examples of operations and uses of FUJITSU SEMICONDUCTOR device; FUJITSU SEMICONDUCTOR does not warrant proper operation of the device with respect to use based on such information. When you develop equipment incorporating the device based on such information, you must assume any responsibility arising out of such use of the information. FUJITSU SEMICONDUCTOR assumes no liability for any damages whatsoever arising out of the use of the information. • Any information in this document, including descriptions of function and schematic diagrams, shall not be construed as license of the use or exercise of any intellectual property right, such as patent right or copyright, or any other right of FUJITSU SEMICONDUCTOR or any third party or does FUJITSU SEMICONDUCTOR warrant non-infringement of any third-party's intellectual property right or other right by using such information. FUJITSU SEMICONDUCTOR assumes no liability for any infringement of the intellectual property rights or other rights of third parties which would result from the use of information contained herein. • The products described in this document are designed, developed and manufactured as contemplated for general use, including without limitation, ordinary industrial use, general office use, personal use, and household use, but are not designed, developed and manufactured as contemplated (1) for use accompanying fatal risks or dangers that, unless extremely high safety is secured, could have a serious effect to the public, and could lead directly to death, personal injury, severe physical damage or other loss (i.e., nuclear reaction control in nuclear facility, aircraft flight control, air traffic control, mass transport control, medical life support system, missile launch control in weapon system), or (2) for use requiring extremely high reliability (i.e., submersible repeater and artificial satellite). Please note that FUJITSU SEMICONDUCTOR will not be liable against you and/or any third party for any claims or damages arising in connection with above-mentioned uses of the products. • Any semiconductor devices have an inherent chance of failure. You must protect against injury, damage or loss from such failures by incorporating safety design measures into your facility and equipment such as redundancy, fire protection, and prevention of over-current levels and other abnormal operating conditions. • Exportation/release of any products described in this document may require necessary procedures in accordance with the regulations of the Foreign Exchange and Foreign Trade Control Law of Japan and/or US export control laws. • The company names and brand names herein are the trademarks or registered trademarks of their respective owners. Copyrights © 2004-2011 FUJITSU SEMICONDUCTOR LIMITED All rights reserved. ii READING THIS MANUAL ¦ Configuration of Page In each section of this manual, the summary about the section is described certainly, so you can grasp an outline of this manual if only you read these summaries. And the title of upper section is described in lower section, so you can grasp the position where you are reading now. iii iv CONTENTS CHAPTER 1 BASIC FUNCTIONS ..................................................................................... 1 1.1 Workspace Management Function ..................................................................................................... 2 1.2 Project Management Function ............................................................................................................ 3 1.3 Project Dependence ........................................................................................................................... 5 1.4 Make/Build Function ..........................................................................................................................