Stimmen - 4, Durchschnittliche Bewertung: 4.3
(
)
)
|
Dieses Gerät hat auch andere Anweisungen:
Motherboards - A8V (2.57 mb)
Motherboards - A8V (87.6 kb)
Motherboards - A8V (2.89 mb)
Anleitung Zusammenfassung
ASUS A8V Deluxe motherboard 2.6 Jumpers 1. Clear RTC RAM (CLRTC) This jumper allows you to clear the Real Time Clock (RTC) RAM in CMOS. You can clear the CMOS memory of date, time, and system setup parameters by erasing the CMOS RTC RAM data. The RAM data in CMOS, that include system setup information such as system passwords, is powered by the onboard button cell battery. To erase the RTC RAM: 1. Turn OFF the computer and unplug the power cord. 2. Remove the onboard battery. 3. Move the jumper from pins 1-2 (default) to pins 2-3. Keep the cap on pins 2-3 for about 5~10 seconds, then move the cap back to pins 1-2. 4. Replace the battery. 5. Plug the power cord and turn ON the computer. 6. Hold down the key during the boot process and enter BIOS setup menu. 7. Load the BIOS default settings or key-in data. A8V ® A8V Deluxe Clear RTC RAM CLRTC 12 23 Normal Clear CMOS (Default) You do not need to cleat the RTC when the system hands due to overclocking. For system failure due to overclocking, use the C.P.R. (CPU Parameter Recall) feature. Shut down and reboot the system so the BIOS can automatically reset the parameter settings to the default values. Chapter 2: Hardware information 2. Keyboard power (3-pin KBPWR) This jumper allows you to enable or disable the keyboard wake-up feature. Set this jumper to pins 2-3 (+5VSB) if you wish to wake up the computer when you press a key on the keyboard. This feature requires an ATX power supply that can supply at least 1A on the +5VSB lead, and a corresponding setting in the BIOS (See section “4.5.5 APM Configuration”). A8V ® (Default) +5V +5VSB KBPWR 2312 A8V Deluxe Keyboard Power Setting 3. USB device wake-up (3-pin USBPWR12, USBPWR34, USBPWR56, USBPWR78) Set these jumpers to +5V to wake up the computer from S1 sleep mode (CPU stopped, DRAM refreshed, system running in low power mode) using the connected USB devices. Set to +5VSB to wake up from S3 and S4 sleep modes (no power to CPU, DRAM in slow refresh, power supply in reduced power mode). USBPWR12 USBPWR34 3 2 2 1 +5V +5VSB (Default) USBPWR56 USBPWR78 12 23 +5V +5VSB (Default) A8V ® A8V Deluxe USB Device Wake Up • The USB device wake-up feature requires a power supply that can provide 500mA on the +5VSB lead for each USB port. Otherwise, the system would not power up. • The total current consumed must NOT exceed the power supply capability (+5VSB) whether under normal condition or in sleep mode. ASUS A8V Deluxe motherboard 2-20 Chapter 2: Hardware information 2.7 Connectors 2.7.1 Rear panel connectors 1 16 11 2 4 15 13 3 12 7 8 9 5 6 14 10 1. PS/2 mouse port. This green 6-pin connector is for a PS/2 mouse. 2. Parallel port. This 25-pin port connects a parallel printer, a scanner, or other devices. 3. IEEE 1394 port. This 6-pin IEEE 1394 port provides high-speed connectivity for audio/video devices, storage peripherals, other PCs and/or portable devices. 4. RJ-45 port. This port allows connection to a Local Area Network (LAN) through a network hub. 5. Rear Speaker-Out port. This Rear Speaker (gray) port connects to the rear speakers on a 4-channel, 6-channel or 8-channel audio configuration. 6. Side Speaker-Out port. This Side Speaker out (black) port connects to the side speakers in an 8-channel audio configuration. 7. Line-In port. This Line In (light blue) port connects a tape player or other audio sources. 8. Line-Out port. This Line Out (lime) port connects a headphone or a speaker. In 4-channel, 6-channel and 8-channel mode, the function of this jack becomes Front Speaker Out. 9. Microphone port. This Mic (pink) port connects a microphone. 10. Center/Subwoofer port. This Center/Subwoofer (yellow orange) port connects to the center/subwoofer speakers on a 6-channel or 8-channel audio configuration. Audio 2, 4, 6, or 8-channel configuration Headset/ 2-channel 4-channel 6-channel 8-channel Light Blue Line In Line In Line In Line In Lime Line Out Front Speaker Out Front Speaker Out Front Speaker Out Pink Mic In Mic In Mic In Mic In Gray -Rear Speaker Out Rear Speaker Out Rear Speaker Out Black ---Side Speaker Out Yellow Orange --Center/Subwoofer Center/Subwoofer 11. USB 2.0 ports 3 and 4. These two 4-pin Universal Serial Bus (USB) ports are available for connecting USB 2.0 devices. 12. USB 2.0 ports 1 and 2. These two 4-pin Universal Serial Bus (USB) ports are available for connecting USB 2.0 devices. 13. Serial connector. This 9-pin COM1 port is for serial devices. 14. S/PDIF optical out port. This port connects to external audio output devices with optical cable connectors. 15. S/PDIF coaxial out port. This port connects to external audio output devices with coaxial cable connectors. 16. PS/2 keyboard port. This purple connector is for a PS/2 keyboard. ASUS A8V Deluxe motherboard 2.7.2 Internal connectors 1. IDE connectors (40-1 pin PRI_IDE, SEC_IDE) This connector supports the provided UltraDMA IDE hard disk ribbon cable. Connect the cable’s blue connector to the primary (recommended) or secondary IDE con...
Motherboards - A8V Deluxe (6.11 mb)