Stimmen - 1, Durchschnittliche Bewertung: 5
(
)
)
|
Anleitung Zusammenfassung
Blinking WLAN works normally with data transmission. OFF WLAN works abnormally, or this WLAN function is disabled. Off Not in use. PHONE Blinking On Dialing, or there is an incoming call, the phone is ringing. On In calling. ON WAN connection established (PDP activated) PPP Blinking WAN connection establishing (PDP activating) OFF WAN connection not established (PDP not activated). 2G/3G ON RF signal is normal (RSSI >= -90dBm). Different color indicates different network. Red: GSM/GPRS/EDGE. Green: HSDPA/HSUPA/UMTS. Blinking RF signal is poor (-100dBm <= RSSI < -90dBm). OFF RF signal is not available (RSSI < -100dBm). ON The corresponding LAN port is connected LAN Blinking The corresponding LAN port is connected with data transmission. Off No network cable connected. MF25A Let’s go Getting started with your device. ZTE CORPORATION NO. 55, Hi-tech Road South, ShenZhen, P.R.China Postcode: 518057 LEGAL INFORMATION Copyright © 2013 ZTE CORPORATION. All rights reserved. No part of this publication may be excerpted, reproduced, translated or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without the prior written permission of ZTE Corporation. The manual is published by ZTE Corporation. We reserve the right to make modifications on print errors or update specifications without prior notice. Version No. : R1.0 Connecting Your Device Follow the number to connect your device. NOTE: • If you want to use the mobile network to connect to Internet, you need to insert your (U)SIM card first. • Your device does not support Micro/Nano or any other nonstandard SIM cards. To avoid device damage, please do not use them. Normal states of the indicators are shown below: Indicator State Description ON External power supply is connected normally. POWER OFF External power supply is disconnected or power off. Configuring Your PC Follow the following steps and figures for Windows XP to configure the Internet Protocol for your connection. NOTE: • Wireless Network Connection is used for Wi-Fi connection. • Local Area Connection is used for Network Cable connection. 1. Right-click My Network Places, and then select Properties. 2. Right-click the icon for Connection, and then select Properties. 3. Select Internet Protocol (TCP/IP), and then click Properties. Accessing the Internet Before accessing the Internet, please make sure: • Your device is connected via network cable or Wi-Fi. • Your PC is configured. To access the Internet: 1. Log in the WebGUI Configuration Page. 1) Launch the Internet browser and enter in the address bar. The login page appears. 4. Select these two items, and then click OK to finish the configuration. 2) Input the password (the default password is admin), and then click Login. 2. Select current mode Change. NOTE: If you select Bridge mode, you need to connect your clients to the LAN ports via Ethernet cable, and use norma...