Stimmen - 0, Durchschnittliche Bewertung: 0
(
)
)
|
Anleitung Zusammenfassung
The following figure is only for your reference. 2. Use your normal Wi-Fi application on the client to search NOTE: IMPORTANT: Your device does not support Micro/Nano or ZTE CORPORATION may lead to automatic shutdown of the device for your safety. any other non-standard SIM cards. To avoid device damage, for the available wireless networks. Please check the label on your device to get the default SSID. NO. 55, Hi-tech Road South, ShenZhen, P.R.China In the case of such event, cool the device in a well-ventilated please do not use them. Postcode: 518057 place before turning on for normal use. Configuring Your PC 3. Select Internet Protocol (TCP/IP), and then click Properties. Warning and Notice • Do not touch the inner antenna area if not necessary. Oth-technicians can undertake repair work. ii. End User’s failure to follow ZTE’s installation, opera-Limitation of Liability Problem Suggested Solution The client connected to the device cannot access the Internet. • Make sure your (U)SIM card is available. • Change the location to find a place with good signal. • Check WAN Connection mode setting. • Contact your service provider and confirm your APN settings. When I use Internet Wi• Make sure the other WLAN device has Fi mode, the already connected to the Internet. client cannot • Make sure that the subnet of your device access the In-and the other WLAN device is different ternet. • Enter the correct address. The default Cannot visit address is or the webGUI m.home. configuration • Only use one network adapter in your page. PC. • Do not use any proxy server. Problem Suggested Solution erwise it will affect your device’s performance. • Operating temperature range of 0°C ~ +35°C and humidity tion or maintenance instructions or procedures. ZTE shall not be liable for any loss of profits or indirect, • For the Wi-Fi connection password, Follow the following steps and figures for Windows XP to con- To the Owner • Store your device out of the reach of little children. Your range of 5% ~ 95% are recommended. iii. End User’s mishandling, misuse, negligence, or im special, incidental or consequential damages resulting from please check the label on the device. figure the Internet Protocol for your Wi-Fi connection. proper installation, disassembly, storage, servicing or device may cause injury if used as a toy. • Some electronic devices are susceptible to electromag-Using Battery or arising out of or in connection with using of this product, • Power on your device and then the SSID operation of the Product. 1. Right-click My Network Places, and then select Properties. • Do not touch the metallic parts of your device so as to netic interference sent by your device if inadequately whether or not ZTE had been advised, knew or should have and Wi-Fi connection password appear • Do not short-circuit the battery, as this can cause exces-iv. Modifications or repairs not made by ZTE or a ZTE- avoid a burn, when your device is worki...