Stimmen - 0, Durchschnittliche Bewertung: 0
(
)
)
|
Anleitung Zusammenfassung
And the following picture is one application example: Establish a connection between your device and Copyright © 2012 ZTE CORPORATION. seconds until all LEDs are off, then release the buttons, the device will restart ZTE MF51 is a 3G mobile hotspot device, working in GPRS/EDGE/WCDMA/HSPA the client automatically and restore to the factory default settings. Inserting SIM Card, Memory Card and Battery All rights reserved. network. It provides Internet connection via USB or Wi-Fi to clients, enabling you to communicate anytime and anywhere. Notes: Indicators 1. Use the thumb catch on the device to open the battery cover. Via USB Cable No part of this publication may be excerpted, reproduced, translated or utilized in 1. Connect your device and the client with the USB cable. microSD is a trademark of SD Card Association. any form or by any means, electronic or mechanical, including photocopying and When the device is powered on, the following icons will light, with the corresponding 2. Install software. Specification The device’s standby and working time are only for your reference, and based on indications listed in the table below: microfilm, without the prior written permission of ZTE Corporation. 5. Line the battery cover up correctly and press gently to close the case. Data Service HSPA: DL 14.4 Mbps UL 5.76 Mbps WCDMA CS: UL 64 kbps/DL 64kbps WCDMA PS: UL 384 kbps/DL 384kbps Interface USB and Wi-Fi Wi-Fi Standard 802.11b/g/n Wi-Fi Security WEP/WPA/WPA2 USB Version USB 2.0 HIGH SPEED USB Interface Type Micro USB Weight 80 g Dimensions (W.H.D): 102.5 mm*51 mm*13.5 mm microSD card Support up to 32 GB microSD card Battery 1500mAh Li-ion battery *Standby time 100 hours *Working time 4 hours Charge time 3 hours Operate system Windows 7, Windows Vista, Windows XP (SP2 or later), Mac OS (10.5 or later) Web Browser IE (7.0 or later), Firefox (3.0 or later), Opera (10.0 or later), Safari (4.0 or later), Chrome (10.0 or later) Working temperature -10 °C ~ +60°C After the installation, the connection between your device and the client will be ideal working environment. Indicators Status Description RED glittering Please charge. RED bright The voltage of battery is low. The voltage of battery is high. GREEN bright Fully charged when power on or standby mode with USB cable. Battery Indication GREEN glittering Charging when power on or power off or standby mode. Under power off mode full charged with USB cable or no charging LED off No charging or fully charged under standby mode without USB cable No battery Wi-Fi Indication BLUE glittering Wi-Fi is active. BLUE bright WPS is active. LED off Wi-Fi is inactive or standby mode. BLUE glittering ...
Dieses Handbuch ist für folgende Modelle:Netzwerk - MF51 (1.12 mb)