Stimmen - 3, Durchschnittliche Bewertung: 3.3 ( )

Hersteller: Antec Dateigröße: 127.45 kb Dateiname: Unterrichtssprache:

Performance Mode If you are a high performance user and you need extra cooling for your CPU. 1. Remove the side panel from the case. 2. Install a 92mm fan to the fan hood so that the air is blowing down to the CPU cooler. 3. Lower the lower air guide with fan down to the CPU cooler. This will bring extra fresh, cool air to the CPU cooler and enhancing CPU cooling efficiency. 4. Connect the fan to the power supply or to the motherboard fan connector as instructed by the manufacturer. Note: We recommend lowering the air guide down so the separation distance between the 92mm fan and the CPU cooler to 20mm to get the best cooling effect. Quiet Mode If you are a quiet computing user and you prefer to install a passive CPU cooler (heat sink without a fan) to get the most possible quiet operation. 1. Install a 92mm fan to the lower air guide as instructed above. 2. Lower the lower air guide down as low as possible without touching the passive heat sink. Note: Please consult the manufacturer's recommendation for the minimum airflow to work with the passive heat sink. You may be able to lower the fan speed beyond the man ufacturer's recommendation, as the air guide will supply fresh cool air to the heat sink directly. This will reduce the fan noise even further. Maintaining the Washable Air Filter From time to time it will be necessary to wash the installed air filter. Not washing the air filter will result in higher system temperatures and possible stability problems. We recommend checking the air filter at least once a month initially. The frequency will change depending on system usage (users whose systems run 24/7 will likely have to check/wash more often than those who don't use their systems every day) and on environmental conditions. To remove the front door In case you need to remove the double hinge door, open the door to 90., and gently press the small plastic tab on the upper hinge. Tilt the door away from the upper hinge pin, then lift the door off the lower hinge pin. Set the door aside in a safe place. To replace the door Place the lower hinge slot over the lower hinge pin and press or rotate the top of the door in so that the tab fully engages with the upper hinge pin. 7 Antec, Inc. 47900 Fremont Blvd. Fremont, CA 94538 Tel: 510-770-1200 Fax: 510-770-1288 Antec Europe B.V. Sydneystraat 33 3047 BP Rotterdam The Netherlands Tel: +31 (0) 10 462-2060 Fax: +31 (0) 10 437-1752 Technical Support US & Canada 1-800-22ANTEC CustomerSupport@antec.com Europe +31 (0) 10 462-2060 europe.techsupport@antec.com © Copyright 2005 Antec, Inc. All rights reserved. All trademarks are the property of their respective owners. Reproduction in whole or in part without written permission is prohibited. Printed in China. Version 1.0.5 3/11/2005 ...

Herunterladen

Geben Sie zwei Ziffern: