Stimmen - 6, Durchschnittliche Bewertung: 4
(
)
)
|
Anleitung Zusammenfassung
This contaminated power can affect audio/video equipment and will degrade the overall performance of your entire system. Common symptoms of contaminated power include pops, hisses, hums and visual artifacts. The MAX 5400-EX is designed to filter this noise, supply clean power to your system and provide noise isolation between the outlet banks so that any noise created by an A/V com- ponent can not contaminate the power going to equipment plugged into the other outlet banks. Model: M5400-EX Key Features Sequential Startup/Shutdown: Complex audio/video systems may be susceptible to voltage transients generated internally at start-up/shutdown if all of the equipment is powered on or off at the same time. This can cause speaker “thumps” which are not only annoying but can also damage the speakers. The MAX® 5400-EX is designed to eliminate these transients by providing a “start-up” delay for the High-Current outlets and a “shutdown” delay for the Switched Outlet Bank. This allows the components plugged into the Switched Outlet Bank to power-up and stabilize before any amplifiers and powered sub-woofers are turned on. This sequence is reversed during shutdown. The amplifiers and powered subwoofers turn off, their power supplies drain, and then the equipment plugged into the Switched Outlet Bank is turned off. Voltage Sense Trigger: This feature provides an ON/OFF trigger for the MAX® 5400-EX using a Direct Current voltage signal. Many components such as pre-amplifiers and receivers have a DC trigger built in, and will transmit a constant power signal when turned on and in use. The presence of this power signal will turn on the MAX® 5400-EX’s switched outlets. When the source component is turned off, the voltage trigger signal is also turned off and the MAX ® 5400-EX’s shutdown sequence is initiated. An AC Adapter of the appropriate voltage, plugged into a switched outlet, may also be used if a DC trigger is not built in. The MAX® 5400-EX voltage sense trigger input uses a standard 3.5mm (1/8") mini-plug jack. This jack has an electrically isolated switch built in. If nothing is inserted into the input jack, the voltage sense is bypassed and the Power Button on the front panel has sole control of the startup/shutdown sequence. If a plug is inserted into the input jack, the front panel switch is bypassed and the voltage sense becomes the startup/shutdown trigger. IMPORTANT, Please Note: The unit needs to be plugged in, and in the powered OFF state before inserting the DC input trigger mini-plug. A trigger output is also provided on this model. When a DC trigger is connected to the MAX® 5400-EX’s Voltage Sense input, the input signal can be passed through the output jack to control the startup/shutdown of an additional device. There is a 10 second delay between when the MAX® 5400-EX receives the input signal and when it is output to the next device. Automatic Over & Under Voltage Protection: Panamax’s patent pending power monitoring circuitry constantly monitors the AC line voltage for unsafe voltage conditions such as prolonged over-voltages and under-voltages (brownouts). These unsafe conditions pose a very dangerous threat to all electronic equipment within the home. If the MAX® 5400-EX senses an unsafe power condition, it will automatically disconnect your equipment from the power to protect equipment from damage. Once the voltage returns to a safe level, the MAX® 5400-EX will automatically reconnect the power. Protect or Disconnect AC Surge Protection: When the MAX® 5400-EX is subjected to a high voltage surge, its voltage output is limited to a safe level and the high levels of surge current are diverted away from the connected equipment. • When subjected to a 6,000V (open circuit voltage) / 500A (short circuit current) surge, the MAX® 5400-EX limits its voltage output to less than 330V peak, UL’s best rating. The MAX® 5400-EX will withstand, without damage, 20,000A surges, far exceeding the UL requirement of only 3000 Ampere surges. • If the magnitude of the surge is greater than the capacity of the surge protection components, the MAX® 5400-EX's Protect or Disconnect Circuitry will disconnect your equipment in order to protect it. The MAX® 5400-EX will need to be repaired or replaced by Panamax if this occurs. Application Specific Coaxial Signal Line Protection: Panamax's exclusive SignalPerfect™ Technology provides application specific protection for your satellite and cable TV equipment. Two lines of protection are provided for each type. The satellite connection is for a coaxial cable connected to a DBS (single or dual LNB) satellite dish. The antenna connection is for a nonamplified off-air antenna or cable TV line. The protection circuitry has been optimized for each application and is not interchangeable. The jacks are not labeled In and Out. The circuitry is bidirectional in both signal transmission and protection capabilities, making it compatible with the latest digital cable and...