Stimmen - 3, Durchschnittliche Bewertung: 3.7
(
)
)
|
Anleitung Zusammenfassung
. Repair or attempted repair by anyone not authorized by us. . Any damage of the product due to shipment. . Removal or installation of the product. . Causes external to the product, such as electric power fluctuation or failure. . Use of supplies or parts not meeting our specifications. . Normal wear and tear. . Any other causes which does not relate to a product defect. . Removal, installation, and set-up service charges. 1.2 Safety Instructions The SPLIT-HDSDI-6-RS, 6 Port HD/SD-SDI splitter with reclocking has been tested for conformance to safety regulations and requirements, and has been certified for international use. However, like all electronic equipments, the SPLIT-HDSDI-6-RS should be used with care. Read the following safety instructions to protect yourself from possible injury and to minimize the risk of damage to the unit. . Do not dismantle the housing or modify the module. . Dismantling the housing or modifying the module may result in electrical shock or burn. . Refer all servicing to qualified service personnel. . Do not attempt to service this product yourself as opening or removing housing may expose you to dangerous voltage or other hazards . Keep the module away from liquids. . Spillage into the housing may result in fire, electrical shock, or equipment damage. If an object or liquid falls or spills on to the housing, unplug the module immediately. . Have the module checked by a qualified service engineer before using it again. . Do not use liquid or aerosol cleaners to clean this unit. Always unplug the power to the device before cleaning. 1.3 Regulatory Notices Federal Communications Commission (FCC) This equipment has been tested and found to comply with Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. Any changes or modifications made to this equipment may void the user’s authority to operate this equipment. 1.4 Introduction The Avenview SPLIT-HDSDI-6-RS receives one SDI input, perfectly duplicates it, and re-transmits four SDI outputs for real time multi-viewing. It is a reliable video device splitting a SDI or HD-SDI video source to four HD-SDI or SD-SDI displays at the same time. 1.5 Features - HD/SD dual-rate distribution - 6 separately buffered outputs - HD cable equalization (Beldon 1694A) - Dual color LED indication of input lock and rate - Pass all ancillary data - Provides automatic input cable equalization up to 300m (1000ft) - Inter-locked power supply for better fixedness - Reclocking SDI signals for cascading and longer transmission 1.6 Package Contents Before you start the installation of the converter, please check the package contents. - SPLIT-HDSDI-6-RS x 1 - Power Adapter (+5VDC) x1 - User’s Manual x1 1.7 Before Installation . Put the product in an even and stable location. If the product falls down or drops, it may cause an injury or malfunction. . Don’t place the product in too high temperature (over 50°C), too low temperature (under 0°C) or high humidity. . Use the DC power adapter with correct specifications. If inappropriate power supply is used then it may cause a fire. . Do not twist or pull by force ends of the optical cable. It can cause malfunction. 1.8 Panel Description FRONT PANEL 1. HD/SD-SDI Input 2. LED – Reserved 3. HD/SD-SDI Output 5 4. LED – Power Indicator 5. HD/SD-SDI Output 6 6. 5V DC power Jack REAR PANEL 7. HD/SD-SDI Output 1 8. HD/SD-SDI Output 2 9. HD/SD-SDI Output 3 10. HD/SD-SDI Output 4 Bottom Panel PIN 1 - OFF PIN 2 – OFF Auto rate detect (143 Mbps rate operation supported only in ARD mode) PIN 1 - OFF PIN 2 – ON 270 Mbps PIN 1 – ON PIN 2 – OFF 1483 / 1485 Mbps PIN 3 - OFF Automatically reclocks bypassed SDI signals PIN 3 - ON Force to bypass SDI signal PIN 4 - OFF Default Operation mode SPLIT-HDSDI-4 Section 2: Installation Follow these instructions for installation of SPLIT-HDSDI-6-RS: 1. Ensure SPLIT-HDSDI-6-RS and all other source devices are turned off 2. Connect a camera or other HD/SD-SDI device to Input of SPLIT-HDSDI-6-RS 3. Connect devices equipped with HD/SD-SDI inputs (e.g. monitors or video processors) to SPLIT-HDSDI-6-RS outputs 4. Turn ON all devices connected to output of SPLIT-HDSDI-6-RS 5. Plug power adapter to 5V DC power jack of SPLIT-HDSDI-6-RS 6 HD/SD-SDI Displays SPLIT-HDSDI-6-RS HD/SD-SDI Camera Section 3: Specifications Item Description Model SPLIT-HDSDI-6-RS SDI Standards SD-SDI & HD-SDI Auto HD/SD-SDI Detection Yes Supported Protocols SMPTE 259M, SMPTE 292M / HDTV (1.485Gbps and 1.485/1.001Gbps) Video Bandwidth [1.485Gpbs & 1.485/1.001Gbps] Data Rates 270 / 1483 / 1485 Mbps Supported Video [HD] 720p50/59.94/60, 1035i50/59.94/60, 1080i50/59.94/60, 1080p24/30 [SD] NTSC@59.94Hz, PAL@50Hz SDI signal type SMPTE-292M, SMPTE-259M Output impedance 75. Reclocking function Yes Cable equalization [HD-SDI] up to 150m (500ft) / [SD-SDI] up to 300m (1000ft) Audio support Yes RP-918 pathological patterns Immune Input Connectors 1...