Stimmen - 3, Durchschnittliche Bewertung: 3.7
(
)
)
|
Anleitung Zusammenfassung
Step 3.2 Click the Available Network tab of the Wireless Monitor, select the SSID (Network Name) of the wireless network that you wish to connect to, and click Add to Profile. 10 Step 3.3 Enter the wireless security key into the Network Key box if the network you are attempting to connect has wireless security enabled. Click OK. Step 3.4 The connection should be now established. Verify that IP Address, Subnet Mask and Gateway have valid numbers assigned to them (instead of all 0’s). The Status should be Associated, and there will be green bars next to Signal Strength and Link Quality. 11 Congratulations! You have now connected to the wireless network successfully. Troubleshooting 1. If you cannot open the wireless monitor utility, make sure that the USB adapter is inserted firmly into the USB port. 2. If you cannot connect to the wireless router, you may want to double check the wireless security settings on the router. The network key you entered in Step 3.3 must match with the settings on the wireless router. 3. If you are experiencing problems with the connection such as low signal strength, slow connection speed, or unstable wireless connection, you can try to tune your router’s signal by changing the channels on the router and/or by adjusting the direction of the antenna(s). You do not need to change the channel on the Adapter; it will automatically pick up the new channel after you reboot the router. Your router has 11 different channels to choose from. Keep going through the channels until you find one that gives you a stable connection. For instructions on changing channels, refer to the documentation that comes with the router. 12 4. Configure Wireless Monitor This section describes the various functions of the Airlink101 Wireless Monitor that you can configure, including the settings of wireless encryption. 4.1 General The General tab provides you with the status of the current connection, including signal, network name (SSID) and IP Address. At the bottom you have options for controlling the utility and adapter. Show Tray Icon allows you to show or hide the tray icon for the utility. 13 Radio Off disables the wireless function of the adapter. Disable Adapter will completely disable the wireless adapter. Note: Virtual WiFi allowed is not supported in this utility version. 4.2 Profile Settings The Profile tab lists the current profiles and allows you to create new profiles. The Available Profile(s) box lists all the profiles that you’ve created for your wireless networks. Profiles are automatically created and added to this list when you connect to new networks. You can also manually add the profiles. 14 To create a new profile, click on Add. The Profile box will appear allowing you to specify the settings for your new profile or to change settings for your existing profile. Enter a Profile Name and SSID. Enter the encryption settings for the profile. Click OK to save the changes. To remove an existing profile, select the profile from the Available Profile(s) box and click on Remove. To modify an existing profile, select the profile from the Available Profile(s) box and click on Edit. To duplicate an existing profile, select the profile from the Available Profile(s) box and click on Duplicate. To activate an existing profile, select the profile from the Available Profile(s) box and click on Set Default. 15 4.3 Available Network The Available network tab lists all of the networks that the adapter detects in your area. Clicking Refresh will refresh the list. To connect to a network, select a network from the list and click Add to Profile. 16 4.4 Status The status section provides you with a list of information about the current status of the adapter. 17 4.5 Statistics The Statistics section gives you information about transmit and receive packet count. 18 4.6 Wi-Fi Protected Setup (WPS) The Wi-Fi Protected Setup™ (WPS) is a new and easy way to configure the encryption for your wireless network clients. In order to use it, you need to have a router that supports this feature, like the AR570W or AR675W Airlink101 Wireless N Router. You also need to configure the wireless encryption on the router; you should find the instructions for configuring it in the router’s User Manual. If your wireless router does not support WPS, then you need to set up the wireless security manually and you can skip this section. We are using the AR675W Airlink101 Wireless N 300 Green Router to illustrate the following setup instructions. Step 4.6.1 Open the Airlink101 Wireless Monitor. Click the Wi-Fi Protect Setup tab. 19 Choose your configuration method: -For Push Button method, click Push Button Config (PBC) tab, continue to Step 4.6.2a -For Pin Input Config method, click Pin Input Config (PIN) tab., continue to Step 4.6.3a Step 4.6.2a If you choose the Push Button method; click the Push Button Config (PBC) tab. Step 4.6.2b Push the Easy Setup Button (WPS button) on the router, and it will start the handshake with wireless...