Stimmen - 2, Durchschnittliche Bewertung: 4.5
(
)
)
|
Anleitung Zusammenfassung
For detailed instructions of other advanced features, please refer to the User’s Manual that can be found on the provided CD. For Macintosh users, you can find the software and installation instructions for MAC 10.4, 10.5, 10.6 is under the MAC directory on the provided CD. Step 1.1 Insert the USB adapter into an available USB port of your computer. Step 1.2 Click Cancel when you see the Found New Hardware Wizard. Windows XP/2000 Users: Windows 7/Vista Users: Step 1.3 Insert the Installation CD in the CD ROM drive. The Autorun screen will pop up. Select Install Utility and Driver from the menu. Note: If the Autorun screen doesn’t appear automatically, go to Start, Run, and type D:\Utility\Setup.exe (where D is the letter of your CD ROM drive) and click OK. Windows 7/Vista Users: When you get warning message(s), make sure that you give permission to continue with the installation of the driver software. Step 1.4 The AutoPlay screen will popup. Click Run Autorun.exe on the screen. Step 1.5 Click Next to begin the installation. Please wait for Windows to finish installing the Airlink101 Wireless Monitor and driver for Airlink101 Wireless Adapter, and the utility. Step 1.6 Select Yes, I will restart my computer now. Click Finish to complete the installation. The driver and utility have been installed. Please continue to Section 2. Section 2 Section 2 Connect to Wireless Network Step 2.1 Click on the wireless icon in the system tray at the bottom right-hand corner of your screen. Airlink101 Wireless Monitor screen will popup. Click on Available Network tab, a list of available network will be shown. Step 2.2 Then, select the one you want to connect to and click Connect. Step 2.3 Enter the network security key if the wireless network you are attempting to connect has wireless encryption enabled. Click OK. The connection should be now established. Step 2.4 The Easy Setup Button(WPS compatible button) is a new and easy way to configure the encryption for your wireless network clients, it is Wi-Fi compatible. In order to use it, you need to have a router that supports this feature. If your router doesn’t support WPS compatible function, continue to Step 2.5. 1. Push the Easy Setup Button of the Adapter until you see the following window pops up on the monitor. This window pops up to acknowledge you that the Adapter is starting to establish a connection. 2. Push the Easy Setup Button (WPS compatible button) of the Router. The following picture shows Airlink101 AR675W Wireless N Green Router. 3. The router will now start the handshake with the wireless Adapter. The connection will be established in 2 minutes. Notice that there are cases that the WPS button on the router to be pushed first before pushing the one on the adapter. Continue to Step 2.7. If the connection is not able to establish, continue to Step 2.5. Step 2.5 Click the Available Network tab of the Wireless Monitor, select the SSID (Network Name) of the wireless network that you wish to connect to, and click Add to Profile. If the network that you are attempting to connect does not have encryption enabled, you will receive a warning about connecting to an unsecured network. Click OK to complete the connection. Step 2.6 Enter the wireless security key into the Network Key box if the network you are attempting to connect has wireless security enabled. Click OK. The Adapter will automatically detect the type of Network Authentication and the Data encryption. All you need to do is to enter the Network Key in the appropriate boxes according to the settings of the wireless router and then click OK to connect. Step 2.7 The connection should be now established. Open Airlink101 Wireless Monitor utility by double clicking the icon on the system tray and go to General tab to check the status of the connection. Verify that IP Address, Subnet Mask and Gateway have valid numbers assigned to them (instead of all 0’s). The Status should be Associated, and there should be green bars next to Signal Strength and Link Quality. Congratulations! You have now connected to the wireless network successfully. Troubleshooting Troubleshooting 1. If you cannot open the wireless monitor utility, make sure that the USB adapter is inserted firmly into the USB port. 2. If you cannot connect to the wireless router, you may want to double check the wireless security settings on the router. The network key you entered in Step 2.4 must match with the settings on the wireless router. 3. If you are experiencing problems with the connection such as low signal strength, slow connection speed, or unstable wireless connection, you can try to tune your router’s signal by changing the channels on the router and/or by adjusting the direction of the antenna(s). You do not need to change the channel on the Adapter; it will automatically pick up the new channel after you reboot the router. Your router has 11 different channels to choose from. Keep going through the channels until you find one that gives ...