Stimmen - 4, Durchschnittliche Bewertung: 4.8
(
)
)
|
Anleitung Zusammenfassung
. . . . . . . . . . . . . . . . . . . . . . . . . . .3 Technical Data . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4 Unit Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . .5 Water Hook-up . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5 Electrical Hook-up & Start-up Procedure . . . . . . . . .6 Operating the Touchpad . . . . . . . . . . . . . . . . . . . . .6 Brewing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7 User Lockout . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7 Bean Counter . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8 User Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8 Pulse Brew Cycle . . . . . . . . . . . . . . . . . . . . . . . . . .8 User Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9 Brew Volume Setting . . . . . . . . . . . . . . . . . . . . . . .10 System Restore Feature . . . . . . . . . . . . . . . . . . . .10 Factory/Field Test Menu . . . . . . . . . . . . . . . . . . . .11 Water System Errors . . . . . . . . . . . . . . . . . . . . . . .12 Timer Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . .12 Setting the Grind . . . . . . . . . . . . . . . . . . . . . . . . . .12 Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13 Shear Plate Replacement . . . . . . . . . . . . . . . . . . .14 Troubleshooting Guide . . . . . . . . . . . . . . . . . . . . .15 Exploded Views . . . . . . . . . . . . . . . . . . . . . . . . . . .17 Wiring Diagrams . . . . . . . . . . . . . . . . . . . . . . . . . .22 Model Grind’n Brew-10H Model Grind’n Brew-11H Model Grind’n Brew-20H Model Grind’n Brew-21H Prior authorization must be obtained from Grindmaster Corporation for all warranty claims. Grindmaster Corporation 4003 Collins Lane Louisville, KY 40245 USA (502) 425-4776 (800) 695-4500 (800) 568-5715 (Technical Service Only) FAX (502) 425-4664 © Grindmaster Corporation, 1997 Patents Pending PRINTED IN USA 0307 Form # BW-350-13 Part #70661 Warning Labels ! WARNING: USE ONLY ON A CIRCUIT THAT IS PROPERLY PROTECTED AND CAPABLE OF THE RATED LOAD. ! WARNING: ELECTRONICALLY GROUND THE CHASSIS. ! WARNING: DO NOT DEFORM PLUG OR CORD. ! WARNING: FOLLOW NATIONAL AND LOCAL ELECTRICAL CODES. ! WARNING: WATER CONNECTIONS SHALL COMPLY WITH THE PLUMBING CODE OF BOCA & THE FOOD SERVICE SANITATION MANUAL OF THE FDA ! WARNING: DO NOT USE NEAR COMBUSTIBLES. ! WARNING: FAILURE TO COMPLY RISKS PERSONAL INJURY, DAMAGE TO EQUIPMENT, FIRE OR SHOCK HAZARD. ! WARNING: READ THE ENTIRE OPERATING MANUAL INCLUDING THE LIMIT OF WARRANTY AND LIABILITY BEFORE BUYING OR USING THIS PRODUCT. ! WARNING: ALWAYS UNPLUG UNIT FROM POWER SUPPLY BEFORE SERVICING. Grind’n Brew® Coffee Systems Page 3 Page 4 Grind’n Brew® Coffee Systems x x x x x x x x 1710 1710 2674 3560 1810 1810 2749 3660 120 120 208/240 120 120 208/240 208/240208/240 1710 1710 2674 3560 1810 1810 2749 3660 120 120 208/240 120 120 208/240 208/240208/240 Technical Data - Single Bean Domestic Models Technical Data - Dual Bean Domestic Models x x x x x x x x 1710 1710 2674 3560 1810 1810 2749 3660 120 120 208/240 120 120 208/240 208/240208/240 1710 1710 2674 3560 1810 1810 2749 3660 120 120 208/240 120 120 208/240 208/240208/240 Technical Data - Single Bean Domestic Models Technical Data - Dual Bean Domestic Models Unit Installation IMPORTANT:This brewer should be installed by a knowledgeable and experienced commercial equipment installer. Brewer Contents Your brewer package should include the following: 1 Grinderbrewer (either single or dual bean) 1 Operation and Instruction Manual (this manual) 1 Hose to 1/4" flare fitting (part # 61237) Tools Required for Installation #2 Phillips screwdriver 9/16" wrench 5/8" wrench (or crescent wrench) 6" level NOTE: Other tools may be needed depending on the type of water supply tubing and location. 1. Inspect unit to see if any damage occurred in shipment. 2. Position brewer on counter. Place on sturdy permanent counter top. If you have an airpot brewer, install the 4" plastic legs (included) at the bottom of the brewer. Lean the brewer towards its side to expose screwholes underneath for legs. Adjust the leg height to suit the size of airpots you will use. IMPORTANT: Adjust the feet to level the brewer. With bubble level, check to see that the brewer is level on countertop. Water Hook-up (All Models) (Refer to Figure A) IMPORTANT: This equipment must be installed in compliance with applicable Federal, State and/or Local plumbing codes having jurisdiction. Incoming water pressure should be greater than 20 psi and not more than 100 psi. 1. The incoming water supply should have a shut-off valve connected in-line. The end should have a female 1/4" flare fitting. Water supply should be a 1/4" I.D. dedicated line branched off a 1" or larger supply line. 2. Prior to installing the brewer, flush out the water line by running approximately 1 gal. of water into a pail. This...