Stimmen - 4, Durchschnittliche Bewertung: 4
(
)
)
|
Anleitung Zusammenfassung
The longer cord should be arranged so that it will not drape over the counter-top or table top where it can be pulled on by children or tripped over. -Your product is equipped with a polarized alternating current line plug (a plug having one blade wider than the other). This plug will fit into the power outlet only one way. This is a safety feature. If you are unable to insert the plug fully into the outlet, try reversing the plug. If the plug should still fail to fit, contact your electrician to replace your obsolete outlet. Do not defeat the safety purpose of the polarized plug. DESCRIPTION OF APPLIANCE (See diagram on page 3) The following terminology will be used continuously in the following pages A. Filter holder B. Water tank C. Coffee lid D. Chlorine filter E. Boiler cap F. Steam boiler G. Steam knob H. Emulsifier I. Milk tank J. Coffee measure K. Anti-spray hood L. Pipe brush M. ON/OFF cappuccino switch (steam boiler) N. Display O. AUTO key P. 1-4 cups key Q. ON/OFF coffee key R. HOUR key S. MIN key T. ON/OFF coffee light U. 1-4 cups light V. AUTO light W. OK light X. ON/OFF cappuccino light (steam boiler) Y. Coffee filter Z. Hot plate Z1. Water level indicator Z2. Jug HOW TO SET THE CLOCK When the coffee machine is connected up to the domestic power supply for the first time the figures “0:00” will flash on the display (N): To set the time of day, proceed as follows: 1. Press the HOUR key for around 2 seconds until the number of hours on the display increases: 2. Before the display stops flashing (after about 5 seconds), set the desired time by repeatedly pressing the HOUR key (fig. 2). Remember to choose “AM” or “PM” as appropriate: 3. Set the minutes by repeatedly pressing the MIN key. (The process can be speeded up by keeping your finger pressed down on the key.) 4. After 5 seconds, the display will stop flashing and the clock will start to work. If you need to reset the time, press the HOUR key for about 2 seconds, then set the new time, as described from point 1 down. The time set will not be held in the memory in the event of a temporary power cut. HOW TO SET THE DELAYED START (TIMER) Check that the time of day has been set correctly. To set the delayed start (the time when you want to make the coffee), proceed as follows: 1. Press the AUTO key for about 2 seconds until “0:00” flashes on the display; 2. Before the display stops flashing (after about 5 seconds) set the desired time by repeatedly pressing the HOUR key. 3. Set the minutes by repeatedly pressing the MIN PREPARING THE COFFEE key. 4. After 5 seconds, the display will stop flashing and the programmed time will be memorized. 5. Press the AUTO key; the AUTO light will come on and at the programmed time the machine will start to make the coffee. If you wish to change the delayed start time once it has been set, press the AUTO key for about 2 seconds before setting a new time as described from point 1 down. Note: at the set time, the machine begins making the coffee but the steam boiler does not come on. AUTO SHUT OFF TIME The machine is programmed by the maker to keep the coffee warm for 2 hours after percolation. It is, however, possible to change this time by proceeding as follows: 1. Press the ON/OFF coffee key for about 2 seconds until “2:00” flashes on the display. 2. Modify the desired time by repeatedly pressing the HOUR key (and also the MIN key if required). 3. After setting the time wait for 5 seconds; when the display stops flashing the time selected will be memorized. Note: if you set “0:00”, the machine keeps the coffee warm for an unlimited period. SETTING FOR 1-4 CUPS In order to increase the strength of the coffee and improve the aroma when fewer than 5 cups are made, press the 1-4 cups key. The 1-4 cups light will come on. CHLORINE FILTER The filter removes the taste of chlorine from the water. To fit it, proceed as follows: • Remove the chlorine filter from the plastic bag and rinse it under the tap. • Raise the coffee lid and remove the filter case from its housing by pulling it upwards (fig. 1). • Open the case by pressing on the special areas marked “PUSH” and carefully position the filter in the compartment as shown in fig. 2. • Close the case and reinsert it in the housing, pushing it right down. • After 80 coffee cycles and after every six months use, the chlorine filter should be replaced. As it is made of biodegradable material, the filter can be disposed of along with normal household waste. • Fill the jug with cold water up to the level marked, according to the number of cups of coffee required (fig. 3). WARNING: never exceed the 10-cup line to avoid causing water to leak out through the rear slots in the machine; do not use water which has been heated, to avoid the machine signalling the end of the coffee percolation prematurely. • Pour the water into the tank (fig. 4). The amount of coffee obtained is slightly less than the amount of water poured into the tank because some of the water remains in the coff...