Stimmen - 0, Durchschnittliche Bewertung: 4
(
)
)
|
Anleitung Zusammenfassung
BREWING 1. To fill the water reservoir, lift the cover and fill it with water up to your desired level. Note: Maximum capacity is 8-cups of water. Do not overfill. 2. Place a basket style paper filter into the brew basket. Fill the filter with the desired amount of coffee. B C Note: We recommend 1-2 tablespoons (5-10 grams) of grounded coffee for every 6 oz. (180ml.) of water. If brewed coffee is too strong for your taste just add a little bit of hot water to your cup of brewed coffee. 3. To insert brew-thru lid into thermal carafe, align the brew-thru lid arrow with the “Insert and Align” arrow on the thermal carafe and twist clockwise (B) . 4. Turn the brew-thru lid clockwise until it is in the “Close” position to brew your coffee (C) . Note: Coffee may overflow if the brew-thru lid is not properly in place. 5. Place the thermal carafe on the carafe plate and plug in the 6. Press the “ON” button to start the brewing cycle. Once the indicator light lights up, the brewing cycle begins. Note: For delay brewing, see “Setting the Clock/Timer & 7. Once the brewing cycle is complete the coffeemaker automatically shut off. 8. Remove the thermal carafe from the carafe 9. To pour coffee, align the arrow on the “Pour” arrow on the handle of the thermal the lid counterclockwise (D) . Note: Make sure the brew-thru lid is 10. Proceed to serve the coffee. 11. Once you finish serving it clockwise. 12. Put the thermal carafe Note: The thermal carafe close position D E F Sneak-A-Cup ® Interrupt Feature 1. This feature enables you to pour a cup of coffee while the coffee is brewing before the brewing cycle is complete. 2. To pour coffee, align the arrow on the brew-thru lid with the “Pour” arrow on the handle of the thermal carafe by turning the lid counterclockwise (E) . Note: Make sure the brew-thru lid is secure before you pour the coffee. 3. When you are finished pouring the coffee, turn the brew-thru lid clockwise until it is in the “Close” position (F) . 4. Immediately replace the thermal carafe back on the carafe plate so that brewing can continue. Important: To avoid possible overflow after removing the carafe, be sure to replace the carafe under the brew basket within 30 seconds to prevent the basket from overflowing. SETTING THE CLOCK/TIMER AND AUTO-BREW Clock/Timer 1. Plug in unit, the clock flashes 12:00 a.m. until time is set. 2. To set current time of day: Press the “HOUR” button until the digital display shows the correct hour. 3. The light on the top left hand corner of the digital display indicates “P.M.” time. 4. Then press the “MIN” button until the display shows the correct minutes. 5. Once the time is set, the clock continues to keep time unless coffeemaker is unplugged or a power failure occurs. 6. To reset the time again follow steps 1-4. Auto-Brew 1. Press the “PROG” button and the auto brew indicator light on the upper right corner of the digital display starts flashing, indicating it is being programmed. 2. Press the “HOUR”, then the “MIN” button until the digital display shows time. Note: Make sure the “P.M.” indicator light on the top left hand corner of display is off if you would like your coffee to be brewed in the morning. 3. Then press the “AUTO” button and the auto brew indicator hand corner of the digital display lights up (see fig. A) Note: If you take too long to press the correct hour and minutes “PROG” button, the clock will return to the time setting. follow steps 1-3. 4. When the brewing cycle begins the auto brew brewing indicator light turns on. 5. When the brewing cycle is complete the automatically shut off. Note: The thermal carafe will keep your coffee 6. To check your pre-set auto time, will display. 7. When the clock returns to the timer. 8. The auto-brew indicator lights up (see fig. A) 9. To automatically coffeemaker 10. If you want to change the time of the auto-brew just follow steps 1-3. Note: The auto-brew function can be canceled at any time by pressing the “AUTO” button a second time. The coffeemaker and the auto brew indicator light automatically shut off. Important: If the coffeemaker is unplugged or a power failure occurs, the clock/timer and auto-brew have to be programmed again in order to automatically brew your coffee. Care and Cleaning This product contains no use serviceable parts. Refer service to qualified service personnel. Important: Do not use abrasive cleansers or scouring pads. Never immerse the coffeemaker in water. Do not place the thermal carafe in the dishwasher. Cleaning G H 1. Make sure the unit is shut off and cool. 2. Open the cover and remove the brew basket and discard the paper filter and grounds (G) . 3. The brew basket may be hand washed with warm sudsy water or place on the top rack of the dishwasher. 4. Dry the brew basket and put back in place. 5. The coffeemaker's exterior, control panel area and carafe plate may be clean with a soft damp cloth. 6. To clean the thermal carafe, open the brew-thru lid by turning it counterclockwise. 7. ...
Dieses Handbuch ist für folgende Modelle:Kaffeemaschinen - BLACK DECKER HOME DE790 (431.82 kb)