Stimmen - 2, Durchschnittliche Bewertung: 3
(
)
)
|
Anleitung Zusammenfassung
The green indicator for button (Figure 2/J) will come on. Swivel the swivel filter (Figure 13) to the left until it clicks into place. The grinding and brewing procedure will start automatically at the set time. At the start time the green indicator for button will go off and the red indicator (Figure 2/B) will be illuminated. Once the coffee has been ground, the filter automatically swivels into the brewing position and brewing begins. Comment: If, once pre-programmed, the start time, number of cups and coffee strength are not to be changed you need only press the button to activate the programme. g 7.5 Quick-Start If the appliance is pre-programmed using the “Auto” function (the green indicator for the button is illuminated to indicate “Program activated”), but you would like some coffee before the start time, press the button (Figure 2/B). The red indicator (Figure 2/B) will be illuminated and the green indicator (Figure 2/J) for “Program activated” will go off. Grinding and brewing will begin at once. 7.6 Deactivating the “Auto” function If you have activated the “Auto” function but do not want the programme to start, simply press the button (Figure 2/J). The green indicator will go off. 7.7 Switching off Switch the appliance off with the button (Figure 2/B). 8 Warming plate (Figure 1/D) After brewing the warming plate keeps the coffee in the glass jug warm. Two hours after brewing the appliance switches off automatically. 9 Removing the jug (Figure 15) When the jug is removed, the anti-drip valve prevents dripping. 10 Cleaning (It is imperative that these instructions are observed!) 10.1 Coffee grinder (Figures 14, 17-19) From time to time (at the latest when a blockage occurs), it is necessary to clean the grinder channel to free it from oily coffee residues. To do this, proceed as follows: Remove the plug from the mains. Open the lid of the fresh water container and turn the screw (e.g., with a coin) on the cover of the grinder channel to “Open” (Figure 17). Take hold of the cover of the grinder channel at the front left and remove it slowly (Figure 18). Insert a paper filter in the swivel filter and move the swivel filter until it clicks into the grinding position. Brush the coffee residue (including that from the rear of the channel) into the paper filter using a suitable item (e.g., paintbrush) (Figure 19). The coffee residue can also be removed using a vacuum cleaner. Then wipe the grinding channel with a dry cloth. Press the release button to move the swivel filter back into the brewing position (Figure 14). Empty the paper filter, replace the cover and turn the screw back to the “Close” position. Check that the cover is correctly positioned. Your coffee machine is now fully ready for use again. If dark, oily coffee beans are used, the grinding channel needs to be cleaned more often than for light beans. To avoid blockages in the grinding channel: • Do not use frozen coffee beans, as water condenses on them on defrosting and can lead to blockages. • Do not swivel the swivel filter back to the grinding position immediately after brewing as steam rising from the coffee grounds can cause a blockage. • Position the appliance sufficiently far away from the cooker or a deep fat fryer as fat can cause a blockage. • Always keep the container for the coffee beans closed. Every now and again clean the coffee grinder (Figure 1/L ) of oily residues from the coffee beans using a dry cloth. 10.2 Coffee part (Figure 16/A and B) The filter insert can be removed for emptying and cleaning. Remove the glass jug and raise the lid of the fresh water container (Figure 1/A), place your finger in the rear handle recess (Figure 16/A) and pull the bracket up. This unlocks the filter insert and it can be removed for g cleaning. Activate the anti-drip valve several times during cleaning. To insert, press the filter bracket vertically upwards and into the rear handle recess by its lug. Reposition the bracket for the fresh water container (Figure 16/B). The filter insert is now relocked. Please check that it is positioned correctly! The glass jug can now be returned to the warming plate. Only clean the appliance using a damp cloth; never immerse it in water. Only the coffee jug and jug lid are dishwasher safe. Descaling - to prolong the life of your coffee machine As a precaution we recommend descaling every three months. If you are using a gold filter, remove it from the filter insert before descaling. Use only an environmentally friendly descaling agent and always follow the manufacturer’s instructions. Do not use any concentrated descaler based on formic acid. Nor should you use a powdered descaling agent. First fill the fresh water container with water and then add the descaling agent. Never vice versa. Place the coffee jug with lid on the warming plate. Allow the descaling solution to work for approximately 15 minutes, then switch on the appliance. Once the descaling solution has percolated through, switch the appliance...
Dieses Handbuch ist für folgende Modelle:Kaffeemaschinen - KAM120 (325.07 kb)