Stimmen - 4, Durchschnittliche Bewertung: 3.5
(
)
)
|
Anleitung Zusammenfassung
When you have filled the water container, set the glass carafe aside (do not set it on the heating plate (H) yet!). 7.10 Filter Holder Insert Caution: If the filter holder insert (M) is not completely locked into the filter holder (O), the drip stop (N) on the bottom of the filter holder insert might not open during brewing. This can cause hot coffee to overflow and can result in serious injuries and damages. Here is how Hot Water Guard see page 21, question 10 Filter holder insert Filter holder to properly lock the filter holder insert into the filter holder: • Open the water container lid. • Remove the cover lid. • Remove the glass carafe from the heating plate and then lower the filter holder insert (M) with the tab of the filter holder insert pointing towards the water container. Push the handle of the filter holder insert down towards the water container and make sure it sits completely flush with the rim of the filter holder (O). • Push with your finger against the drip stop (N). If the filter holder insert is in the proper position, it will stay inside the filter holder and not move upwards. CAUTION: Messy / Dangerous! If you forget to place the filter holder insert (M) in the filter holder (O) and you slide the filter holder underneath the grinder, it will start grinding and spread the ground coffee on your counter. It will then return the filter holder underneath the water container lid and the brewing process will start, splashing hot water onto the heating plate. In this case, immediately push the On/Off button to turn off the machine and wait until the water pumping stops! Always move the filter holder WITH the filter holder insert AND the GoldTone filter underneath the grinder. 12 7.11 Cover Lid The cover lid (L) minimizes static coffee particles clinging to the outside of the filter holder. • Open the water container lid (I). • Make sure that the filter holder insert and the GoldTone filter (or your filter paper) are inserted in the filter holder (O). • Place the cover lid on top of the filter holder insert (M) so that the large hole is on the left side. Make sure that the front rim fits snugly into the groove created by the filter holder insert and the outside filter holder. • Close the water container lid. Now you can swing the filter holder underneath the grinder. • Cleaning: Wipe the lid clean after each use. Do not clean in dishwasher! Note: The lid has two parts: a soft, removable collar and a hard disk. If you accidentally remove the soft collar, just replace it in its original position (with the high rim pointing upwards). 8. GRINDING AND BREWING COFFEE NOW • Select cup and strength setting (see page 8, chapter 7.4). • Fill beans into the bean container (see page 10, chapter 7.7). • Fill water into the machine (see page 12, chapter 7.9). • Make sure the filter holder insert, GoldTone filter (or paper filter) and cover lid are in place (see page 12, chapter 7.10 and 7.11). • Swing the filter holder to the left until it locks itself underneath the grinder. • Place the glass carafe on the heating plate (H). Note: Keep the carafe handle pointed straight outward during the brewing process. If the handle points to the right and the pouring spout of the carafe sits underneath the feeder channel, moisture from the freshly brewed 13 soft collar insert your finger or any other the feeder channel. coffee could flow upwards into object into the grinder. FIRST TIME GRINDING: First use the red light turns on. • Push the on/off button (G4) until of the grinder will yield a bit less ground coffee (which is used to fill The grinder will start grinding the feeder channel). All further and the coffee will fall into the grinding will yield the correct feeder channel cover you can amount of ground coffee. actually see how the ground coffee moves forward. After the CAUTION: Do not open the water grinding is finished, the filter container lid during the brewing holder will automatically swing process. Hot water could spill out, back and underneath the water causing serious injuries. container lid and the brewing process will begin. CAUTION: Before pouring water filter. Through the window in the • After brewing is finished, the into the water container again, turn machine will keep the coffee hot the coffee maker off and let it cool for two hours. Then the machine down for two minutes. will turn off automatically (red 8a. Drip Stop / Stop-And-Serve indicator light turns off). If you • While the coffee is brewing you want to keep the coffee hot can remove the carafe to pour a longer, simply press the on/off cup or two. The drip stop in the button (G4) again for an additional filter holder will close automati two hours of warmkeeping. cally. Replace the carafe within • If coffee beans should get stuck 20 seconds. Then the flow of during grinding, lightly tap the coffee continues. bean container lid. CAUTION: The drip stop might not CAUTION: As long as the grinder close completely allowing coffee is in operation...