Stimmen - 4, Durchschnittliche Bewertung: 4 ( )

Hersteller: Jura Capresso Dateigröße: 628.31 kb Dateiname: Unterrichtssprache:

We recommend carrying out the de-scaling (as described in point 13) within the next few days. Warning lamp does not go out until the complete decalcifying prozess has been carried out. 11.6 Use of Claris filter cartridges If the Claris filter cartridges are used correctly, your machine no longer needs de-scaling. You can obtain more information from the brochure “Claris. Hard on scale. Gentle to your coffee machine.” (enclosed in the welcome pack). 11.7 Insert filter Pull up the cartridge holder in the water tank. Pressing gently, put the filter cartridge into the water tank (Fig. 4). Close the cartridge holder until it engages audibly. Fill the water tank with cold fresh tap water and put it back into the machine. Switch the machine off with the ON/OFF switch. Press the draw-off key for about 3 seconds. The degree of hardness set appears on the display. Press the draw-off key until only the symbol is still alight. Press the ON/OFF switch as a confirmation. The , symbols light up. Place a sufficiently large vessel under the pivoting nozzle for hot water/steam (13) and turn the selector switch for hot water/ steam (12) to the position . Draw off water until the symbol lights up. Now turn the selector switch for hot water/steam (12) back to the position . When the symbol lights up, press the maintenance key (4). Your machine rinses and is ready for drawing off coffee. The water can be slightly discoloured (not dangerous to health) 11.8 Replace filter After 50 litres have been drawn off, the filter loses its effect. The symbol flashes to inform you. If you do not draw off often, you should replace the filter cartridge every 2 months, but no report appears on the display. There is a special disk on the cartridge holder so that you can set the replacement date. Switch your machine off with the ON/OFF switch. Press the maintenance key (4) for about 3 seconds. The , symbols light up. Empty the water tank and lift up the cartridge mounting. Pressing gently, put the new filter cartridge into the water tank (Fig. 4) Place a sufficiently large vessel under the pivoting nozzle for hot/water steam (13) and turn the selector switch for hot water/steam (12) to the position . The symbol flashes. Draw off water until the symbol lights up. Now turn the selector switch for hot water/steam (12) back to the position . When the symbol lights up, press the maintenance key (4). Your machine rinses and is ready for drawing off coffee. 11.9 General cleaning instructions Never use abrasive articles or corrosive chemicals to clean your machine. Wipe down the casing on the inside and out using a soft, damp cloth. Clean the pivoting nozzle for hot water/steam after each use. After heating milk, draw off a little hot water in order to clean the inside of the pivoting nozzle. You can take off the frothing aid for a thorough cleaning (Fig. 8). The water tank should be rinsed out and filled with clean water every day. If there is scale visible in the water tank, you can remove it with a customary de-scaling agent. Remove the water tank from the machine for this purpose. 13 E 11.10 Empty system This procedure is necessary in order to protect the machine from damage by frost in transport. Switch the machine OFF with the ON/OFF switch. Place a vessel under the pivoting nozzle for hot water/steam (13). Turn the selector switch for hot water/steam (12) to position . Switch your machine back on again with the ON/OFF switch. The symbol lights up. Press the maintenance key until the symbol flashes. . Draw steam off until the flow of steam is automatically interrupted and the symbol lights up on the display. After this, turn the selector switch for hot water/steam (12) back to the position. 12. Cleaning The machine has an integrated cleaning programme. If the machine needs cleaning, the symbol flashes. You can continue to draw off coffee or hot water/steam and run the cleaning programme later. Only use Jura cleaning tablets. They are available from your Jura dealer. You must not interrupt the cleaning programme once it has started. Switch your machine on with the ON/OFF key. Press the maintenance key (4) for about 3 seconds. The (only when necessary), , symbols light up. Fill the water tank. Empty the drip tray and the grounds container and put both of them back in again. The (only when necessary), symbols go off and the symbol appears. Please a vessel under the coffee spout (9) and press the maintenance key (4). The symbol goes off. The symbol lights up to inform you that the cleaning process has been activated. If the symbol lights up, empty the drip tray (if necessary) and put it back in again. The symbol goes off and the , , symbols light up. Now put a Jura cleaning tablet into the filler funnel for powder coffee (10) (Fig. 9). Press the maintenance key (4). The , symbols go off. The cleaning process is continued. This is displayed by the symbol lighting up. If the symbol lights up again, empty the drip tr...

Herunterladen

Geben Sie zwei Ziffern: