Stimmen - 3, Durchschnittliche Bewertung: 4 ( )

Hersteller: Jura Capresso Dateigröße: 467.11 kb Dateiname: Unterrichtssprache:

be created. Skim milk will produce the most froth and will let you taste more of the coffee. 1% and 2% milk will give you less Assembly of Frother Parts froth. Regular whole milk (3% fat) will produce the least amount • Make sure the Steam Nozzle is screwed onto the Metal Tube of froth. You can also use soy milk. (Fig. 15a) finger tight. • Assemble the Dual Frother and make sure that the tip is 15. CLEANING THE DUAL FROTHER PLUS screwed onto the Connector finger tight (Fig 14a, c). Always keep the Dual Frother Plus clean and free of milk • Push the black Clip-on Connector (Fig.14c) firmly into the deposits. Clean immediately after use. Hardened milk particles steam nozzle (the connector should sit flush with the chrome will make it impossible to create milk froth. sleeve (Fig. 15b) so that the steam nozzle is no longer visible). Fast cleaning: Please note: If the parts are not connected tightly it will not be Display shows READY. Place a cup underneath the frother possible to create the frothy foam on top of the milk. (Fig. 13) and turn the Steam/Water Selector to the water symbol. Let hot water run through the frother for about 3 seconds and 16. CLEARYL WATER FILTER CARTRIDGE then stop. This will flush out any small milk droplets. The machine comes with one Water Filter Cartridge. This Thorough cleaning of the Dual Frother parts: cartridge is specially made for use with the F7/F8. • Remove the Dual Frother (Fig.14) from the Steam Nozzle The cartridge: (Fig. 15c). • Reduces the water hardness up to 75%. Please note: The Dual Frother is tightly connected to the • Removes (if present) up to 85% chlorine, up to 90% lead, up Steam Nozzle. First loosen the Clip-On Connector part (Fig. 14c) to 95% copper and up to 67% aluminum. by turning it a few times, then push down to remove. • Cleans the water through an upward current principle (Fig. 8) • Unscrew the black tip (Fig.14a) from the Clip-On Connector just before the brewing cycle starts, ensuring freshly filtered (Fig. 14c). You can use a coin to loosen the black tip. water every time you make coffee. • Soak all three parts in hot soapy water. • Eliminates decalcifying. When using the water filter cartridge, • Make sure that the two side holes and the channel of the black you never need to decalcify your machine. tip (Fig. 14a) are free of any milk deposits. • To reorder cartridges see chapter 22 "Supplies". 15. 16a. INSTALLING & ACTIVATING THE CLEARYL WATER IMPORTANT: Do not let the filter dry out. CARTRIDGE If you do not use your IMPRESSA for more than three days in a Important: Never install the cartridge before or during row and you still have an active filter, we recommend the follow" Preparing Machine For The First Time." ing easy procedure: Empty the water tank, remove the filter and • Make sure the water tank is empty. immerse it at least to a third of its length into a cup with cold • Remove cartridge from its bag and rinse cartridge under water. water. Store the cup in the refrigerator. This way the filter does • Open water container lid and pull up the holder for the not dry out. When you use your machine again, install the filter. cartridge (Fig.9). Use the hot water cycle and let approx. 16 oz. of water run • Insert the cartridge with its tapered end down into the water through the system. Initially the water may be slightly discolored container. Make sure it fits securely inside the fins. Push down gently (Fig.10). 16b. REPLACING THE CLEARYL WATER CARTRIDGE • Close the holder for the cartridge so that it engages in the The filter is monitored automatically. After approx. 75 liters of water tank (Fig.11). water (~2,500 oz.), the filter loses its effect. The display changes • Fill the water tank with fresh cold water and replace. from READY to CHG FILTER / READY. You can still make You must activate the cartridge as follows: coffee, but we recommend replacing the filter within one week! 1. Push and hold the P button (Fig. 3e). FILTER – Attention: The filter should be changed every 3 months if you 2. Push the Dial and the display shows NO use less than 75 liters of water. In this case, no message will 3. Turn the Dial until the display shows YES appear in the display. 4. Push Dial confirm. The display shows INSERT / OPEN TAP Important: Once the filter has lost its calcium suppressing 5. Place a 20 oz. container underneath the frother. abilities, calcium will build up inside the machine. Since the 6. Turn the Steam/Water Selector to the water symbol. Water Hardness Selector is off, the machine will not remind you FILTER RINSING. For the next 90 seconds the machine will when to decalcify. This could clog and ruin your machine. push water through the filter and through the frother. Do not • Remove the old filter. The cartridge is environmentally friendly. interrupt this process. This activates the filter. Dispose it with your regular household trash. The machine will stop automatically. • Make sure the water tank is empty. 7. CLOSE TAP. Turn the Water/S...

Herunterladen

Geben Sie zwei Ziffern: