Stimmen - 1, Durchschnittliche Bewertung: 4
(
)
)
|
Anleitung Zusammenfassung
– there is a passage of low frequencies or very low volume within a track. – the signal strength of the left and right channels are very different. • The Multi-AMS function is inoperative on a deck whenever the other deck is playing, recording (except during dubbing), or in pause. • Even if DIRECTION MODE is set to s, the deck stops when the current side reaches the end during Multi-AMS operation. • The tape counters are reset to “0000” when you turn off the tape deck. Creating your own program —RMS Play (TC-WE675 only) By creating a program, you can play back tracks on deck A in any order that you want. The Random Music Sensor (RMS) function lets you create a program of up to 28 tracks, from the 1st to the 14th tracks on each side of the tape. 1 Press RMS/START. “RMS” and a flashing cursor appear in the display. 2 Press h (BACK) or H (FRONT) to select the side of the tape. h or H appears in the display. 3 Press m or M repeatedly until the track number you want appears in the display. 0 3 H 1 2 34567 8 9 10 11 12 13 14 FRONT RMS BACK Side of the cassette Track number 4 Press SET to store your selection. To program the same track again, press SET once more. 1 3 H 1 2 34567 8 9 10 11 12 13 14 FRONT RMS BACK Track number Order on the program 5 Repeat Steps 2 to 4 to program more tracks. If “FULL” appears in the display This means that you’ve already programmed 28 tracks and can’t program any more. 6 Press RMS/START to start RMS Play. The peak level meters appear in the display. To stop RMS Play Press x (CLEAR) once. The RMS program still remains. To resume RMS play, press RMS/START. To cancel RMS Play Press x (CLEAR) repeatedly until the peak level meters appear in the display or eject the tape in deck A. When RMS Play is canceled, the RMS program is automatically erased. To alternate between the RMS and peak level meter displays Press DISPLAY. Tip To play the program again after RMS Play ends, press RMS/START. Notes • During RMS Play, you can only use CHECK, DISPLAY, and x on deck A, and x, m, and M on deck B. • The RMS function may not work properly if a blank space between tracks is short. • If there is a long blank space between tracks, the deck may fast-forward a portion of the blank space. • If your program includes a number for a track that does not exist, the deck will skip that number during RMS Play. Checking the order of tracks in the program Press CHECK. Each time you press this button, the display shows the track numbers in the order they were programmed. After the last track in the program, “End” appears in the display. Adding tracks to the end of a program Press x (CLEAR) once, and follow Steps 2 to 5 in “Creating your own program (RMS Play)” on page 8. Note For more information on the availability of Sony stereo receiver remotes with RMS capability, contact your nearest Sony dealer. Playing a Tape Recording on a Tape Recording on a Tape Recording on a tape 1 Turn on the amplifier and play the program source you want to record. 2 Press POWER, and press A fully to open the cassette holder, then load a cassette. 1) facing you With the side you want to record 1) On the TC-WE675, you can record on both decks. On the TC-WE475, you can record only on deck B. 3 Set DIRECTION MODE. To record on Set to Only one side g Both sides2) s 2) Recording stops when the tape reaches the end of reverse side. 4 Press z REC. H lights up for recording on the side facing you. If it doesn’t, press H once. The tape deck automatically adjusts the recording level (see page 12). After the AUTO indicator lights up continuously, stop playing the program source. If you wish to adjust the recording level manually, see “To adjust the recording level manually” on page 11. Do not press POWER or A while the tape deck is operating. If you do so, the tape may be damaged. 5 Press X PAUSE or H. Recording starts. 6 Start playing the program source. To Press Stop recording x Start recording from the h twice in Step 5 reverse side Pause X PAUSE. Press the button again to resume recording. Take out the cassette A after stopping recording Tip To protect recordings against accidental erasure, break out the record-protect tab(s) (see page 20). To record with the Dolby NR Set DOLBY NR to ON (TC-WE675 only), and select B or C before you start recording. To record FM broadcasts with the Dolby NR (TC-WE675 only) If the FM reception is unsatisfactory, set DOLBY NR to ON FILTER (multiplex filter). Tip The Dolby HX Pro3) automatically works during recording. Distortion and noise in the high-frequency response are reduced to produce high-quality sound that can be enjoyed even during playback on other tape decks. 3) Manufactured under license from Dolby Laboratories. HX Pro headroom extension originated by Bang & Olufsen. “Dolby”, “HX Pro”, and the double-D symbol are trademarks of Dolby Laboratories. To adjust the recording level manually After pressing z REC in Step 4 on page 10, turn REC LEVEL so that the peak level meters reach the recommended lev...
Dieses Handbuch ist für folgende Modelle:Kassettendecks - TC-WE475 (211.66 kb)