Stimmen - 4, Durchschnittliche Bewertung: 4
(
)
)
|
Anleitung Zusammenfassung
* Manufactured under license from Dolby Laboratories. “Dolby” and the double-D symbol are trademarks of Dolby Laboratories. The TC-SP55 tape deck is designed only for the CMT-SP55MD Micro Hi-Fi component system Here are some of the features you can use with this tape deck when connected with the CMT-SP55MD Micro Hi-Fi component system (see page 4). Auto Power On/Off The tape deck power is tied with the CMT-SP55MD Micro Hi-Fi component system. Synchro Recording You can easily record a CD onto a tape (see pages 6 and 10). Automatic Source Selection You can switch from another source to the tape deck and start playing a tape just by pressing H or h on the tape deck (see page 8). Timer You can wake up to music or record a radio programme at a preset time. For details, refer to “Falling asleep to music” and “Waking up to music” in the CMT-SP55MD Operating Instructions, and “Timer recording radio programmes” on page 15. Remote Control You can operate the tape deck using the remote supplied with CMT-SP55MD. Table of Contents Getting Started Hooking up the system .............................. 4 Operations Recording a CD on a tape — CD-TAPE Synchro Recording ...... 6 Playing a tape ............................................ 7 Recording a tape on an MD ...................... 9 Recording your favourite CD tracks on a tape — CD-TAPE Synchro Recording .... 10 Recording an MD on a tape .................... 11 Recording your favourite portions on a tape — Manual Recording ....................... 13 Recording from the radio ........................ 14 Timer recording radio programmes ........ 15 Additional Information Precautions .............................................. 17 Troubleshooting ...................................... 18 Messages ................................................. 19 Specifications .......................................... 19 Index .......................................... Back cover Getting Started Hooking up the system Perform the following procedure 1 and 2 to hook up your system using the supplied cord. Note Be sure to hook up the system with the mains lead unplugged from the mains. Hooking up the system with the mains lead plugged in may cause the system to malfunction. AM loop aerial Right speaker CMT-SP55MD rear panel FM aerial Left speaker Tuner Amplifier CD player Tape deck MD deck Preparations 1 Stack the components vertically in the order of tuner, amplifier, CD player, tape deck and MD deck. 2 Disconnect the system cable supplied with CMT-SP55MD from the SYSTEM CONTROL 3 connectors on the tuner and MD deck. 1 Connect the SYSTEM CONTROL 3 connectors (red) in the order of the tuner, tape deck and MD deck using the system cable supplied with TC-SP55. SYSTEM CONTROL 3 Arranging the components side by side Once you have finished the connections, you can rearrange the components as desired. Getting Started Tip All information for the TC-SP55 tape deck appears in the display on the tuner of CMT-SP55MD. Notes • The system cable is used to send signals and electricity between the components for interlinked operation. Be sure to insert the connector horizontally until it clicks into place. Otherwise the system will not operate correctly. • Keep the system cable away from the aerials to prevent noise or malfunction. 2 Connect the mains lead to the mains after you complete all the connections. Operations Recording a CD on a tape — CD-TAPE Synchro Recording You can make an analogue recording of a CD on a tape. You can use TYPE I (normal) or TYPE II (CrO2) tape. The recording level is automatically adjusted. You can also record a programme of favourite tracks (see page 10). To turn on the system, press ?/1 (power). The tape deck turns on automatically. 1 Press A on the tape deck to open the cassette tray and insert a blank tape. With the side you want to record on facing up. Press A again to close the cassette tray. ?/1 (power) 32 2 Press A on the CD player and place a CD on the disc tray. With the label side up. When you play a CD single (8 cm CD), place it on the inner circle of the tray. Press A again to close the disc tray. 3 Turn FUNCTION until “CD” appears. 4 Press CD SYNC REC on the tape deck. The CD SYNC REC indicator lights up. The tape deck stands by for recording and the CD player pauses for play. DOLBY NR* 4 561 * This tape deck is equipped with the Dolby B-type noise reduction system. 5 Press DIRECTION repeatedly until g appears to record on one side or h (or j) to record on both sides. 6 Press S on the tape deck. Recording starts. When the recording is completed, the CD player and the tape deck stop automatically. To Do this Stop recording Press s on the tape deck or CD player. Remove the Press A on the tape deck and CD tape and CD player in stop mode. Tips • When you want to record on the reverse side, press h on the tape deck in step 5. • When you record on both sides, be sure to start from the front side. If you start from the reverse side, recording stops at the end of the...