Stimmen - 5, Durchschnittliche Bewertung: 4.8
(
)
)
|
Anleitung Zusammenfassung
10.5 inch (267 mm) W.C. 13 inch (330 mm) W.C. AC 120V, 60 Hz Flex line: 3/8 inch flare nut; ball valve: 1/2 inch female x 3/8 inch flare Flame burners Electronic spark ignition Forced combustion, forced convection Low (L): minimum combustion; High (H): maximum combustion; 60° - 80° F in 2° increments (16° - 26° C in 1° increments) Electronic thermistor Bottom front louvers All parts: 2 years from date of purchase DIMENSIONS - inches (mm) WEIGHT: 154.3 lbs (70 kg) 35 7/16 (900) 2 15/ 16 (71) 27 9/16 (700) 10 13/ 16 (274) 23 5/8 (600) B B 14 1/2 (369) 25 13/ 16 ( 655) 26 3/ 4 (679) 17 13/16 (453) 3 5/16 (84) 33 3/16 (842) 2 1/ 4 (57) 21 5/ 16 - 23 5/ 16 (542 - 592) 15 3/4 (400) GAS CONNECTION 14 7/8 (378) FLUE CONNECTION 4 15/16 ( 126) 33 3/16 (842) Rinnai is continually updating and improving products; therefore, specifications are subject to change without prior notice. Local, state, provincial and federal codes must be adhered to prior to installation. © 2009 Rinnai Corporation 750ETRA SP 7/2009 RHFE-750ETRA LOCATION Available Fascias (Front Panels) Minimum Enclosure Dimensions in a Corner x 63.8 in (1620 mm) y 45.1 in (1146 mm) z 31.9 in (810 mm) wdhxyzWidth (w) 33.8 in (860 mm) Height (h) 26.0 - 26.2 in (660-665 mm) Depth (d) 15.0 - 16.9 in (380-430 mm) Minimum Enclosure Dimensions FASCIAS Clearances for a mantle or decorative overhang 5” 45 3” Minimum Interior wall 1” 2” 3” 4” Side view LOCATION Available Fascias (Front Panels) Minimum Enclosure Dimensions in a Corner x 63.8 in (1620 mm) y 45.1 in (1146 mm) z 31.9 in (810 mm) wdhxyzWidth (w) 33.8 in (860 mm) Height (h) 26.0 - 26.2 in (660-665 mm) Depth (d) 15.0 - 16.9 in (380-430 mm) Minimum Enclosure Dimensions FASCIAS Clearances for a mantle or decorative overhang 5” 45 3” Minimum Interior wall 1” 2” 3” 4” Side view Description Part Number Flat Metal - Black Front R2700 Flat Metal - Stainless Steel Front R2701 Radius Glass - Silver Front R2702 Radius Glass - Black Front R2703 VENTING WITH NO EXTENSIONS Name Kit No. fits walls Vent Kit A FOT-203 4 1/3 - 9 1/2 inch (110 - 240 mm) Vent Kit B FOT-204 9 1/2 - 15 3/4 inch (240 - 400 mm) Wall penetration hole: 3 1/2 in (90 mm) The FOT-203 Vent Kit is included with the appliance. Flue extensions are not authorized to be used with the FOT-203 and FOT-204 manifolds. FOT-203 / FOT-204 Rinnai Corporation • 103 International Drive • Peachtree City, GA 30269 • Toll-Free: 1-800-621-9419 • Fax: 678-364-8643 • RHFE-750ETRA VENTING WITH EXTENSIONS Maximum Length = 33 feet (10 m) and 3 elbows Certified and Listed Vent Products Manufacturer: Metal-Fab Product: Corr/Guard Part Number Description 3CGRFA Adapter Kit (available from Rinnai 3CGDS Condensate Collector 3CGRVT Vertical Termination 3CGRHT Horizontal Termination 3CG6 6” Vent Pipe Extension 3CG12 12” Vent Pipe Extension 3CG18 18” Vent Pipe Extension 3CG24 24” Vent Pipe Extension 3CG36 36” Vent Pipe Extension 3CGRHA 90 Degree Vent Pipe Elbow NOTICE Installations depicted are examples of configurations only and exclude brackets, flashing, trim, and other accessories required for a complete installation. Follow the guidelines in the Rinnai RHFE-750ETRA manual and follow the Metal-Fab installation instructions for installing the venting. Refer to the Metal-Fab direct vent system components catalogue to determine the parts required for you particular vent application. VERTICAL TERMINATION, 3CGRVT CONDENSATE COLLECTOR, 3CGDS HORIZONTAL TERMINATION, 3CGRHT Maximum Length draining back to appliance without a Condensate Collector = 8.2 feet (2.5 m) Sloped toward appliance to prevent condensate collecting in the elbow. ADAPTER,3CGRFA (available from Rinnai) 90 DEGREE VENT PIPE ELBOW, 3CGRHA VENT PIPE EXTENSION Rinnai Corporation • 103 International Drive • Peachtree City, GA 30269 • Toll-Free: 1-800-621-9419 • Fax: 678-364-8643 • ...