Stimmen - 2, Durchschnittliche Bewertung: 3.5
(
)
)
|
Anleitung Zusammenfassung
Contact 1.800.762.1142 for assistance. Do not return to place of purchase. page no. 3 Parts List Exploded View 1 Spark Guard Handle 58-10-019 2 Spark Guard 58-10-020 3 Rail (4) 58-10-021 4 Spark Guard Supports (4) 58-10-022 5 Bottom Bowl 58-10-025 6 Leg (3) 58-10-024 2 3 1 5 3 3 3 4 6 Hardware A Screw M6x10 Black Nickel Plated Head 14 pcs B Nut M6 Black Nickel Plated 1 pc Tools Required for Assembly (Not Included) #2 Phillips Head Screwdriver Wrench Outdoor Fireplace Model No. WAD992SP 1 DO NOT RETURN PRODUCT TO STORE. For assistance call 1.800.762.1142 toll free. Please have your owner’s manual and model number available for reference. For Easiest Assembly: • To avoid losing any small components or hardware, assemble your product on a hard, level surface that does not have cracks or openings. • Clear an area large enough to layout all components and hardware. • When applicable, tighten all hardware connections by hand first. Once the step is completed go back and fully tighten all hardware. • Follow all steps in order to properly assemble your product. Typical assembly: approximately 20 minutes. Assembly Instructions 2 Attach Legs A x 6 3 Attach Rails and Spark Guard Supports A x 8 4 Attach Handle B x 1 Contact 1.800.762.1142 for assistance. Do not return to place of purchase. page no. 5 5 Place Spark Guard WARNING: Before using this outdoor fireplace, make sure you have read, understand and are following all information provided in the Important Safeguards presented on page 2. Failure to follow those instructions can cause death, serious injury or property damage. Lighting with wood 1. Make sure all of there is no ash in the bottom of the bowl and ash receiver. 2. Place a layer of dry kindling or a natural firestarter such as Fatwood™ onto the center of the grate. 3. Place above that a layer of dry seasoned hardwood that is cut to lengths no more than 3/4 the diameter of the bowl. CAUTION: Do NOT add gasoline, kerosene, diesel fuel, lighter fluid or alcohol to relight or enhance an existing fire. 4. Use a long match to light kindling or firestarter. 5. Using heat resistant gloves and fireplace tool to replace spark guard once the kindling or firestarter is lit. Tending the fire You may need to shift and/or add logs for an ideal experience. CAUTION: Do NOT place hot fireplace tools onto combustible surfaces such as grass, wooden deck or furniture. 1. Using heat resistant gloves and fireplace tool to carefully remove spark guard. 2. While using a long handled fireplace tool, shift coals and logs to allow additional airflow. 3. Do NOT add gasoline, kerosene, diesel fuel, lighter fluid or alcohol to relight or enhance an existing fire. CAUTION: Do NOT add gasoline, kerosene, diesel fuel, lighter fluid or alcohol to relight or enhance an existing fire. 4. Wait until glowing coals have developed before adding any additional wood. If additional wood is required, place wood on top of coals. Be careful not to shift ashes. 5. Using heat resistant gloves and fireplace tool to replace spark guard. Extinguishing 1. Allow fire to burn itself out. 2. Do NOT use water to extinguish as this is dangerous and can cause damage to outdoor fireplace. Cleaning and Care Inspecting This outdoor fireplace should be inspected on a regular basis to ensure product safety and longer product life. CAUTION: Do NOT attempt to inspect this outdoor fireplace until the fire is COMPLETELY out. 1. Check handles to make sure they are secure. 2. Check components for any signs of damage or rust. 3. If damage to any component is detected, do NOT operate until repairs are executed. Cleaning This outdoor fireplace should be cleaned on a regular basis to promote safer experiences and longer product life. Note: After repeated use, discoloration of the finish may occur. CAUTION: Do NOT attempt to clean this outdoor fireplace until the fire is COMPLETELY out. CAUTION: Do NOT use oven cleaner or abrasive cleaners as they will damage this product. CAUTION: Do NOT clean any part of this outdoor fireplace in a self cleaning oven as it may damage the finish. 1. Wipe exterior surfaces with a mild dishwashing detergent or baking soda. 2. For stubborn surfaces use a citrus based degreaser and a nylon scrubbing brush. 3. Rinse clean with water. 4. Remove built-up creosote from components with a chimney cleaning product. Tip: Keeping the outdoor fireplace covered when cooled and not in use will help protect it from the elements. Storage CAUTION: Do NOT move or store this outdoor fireplace until the fire is COMPLETELY out. 1. Once the fire is out, coals are cold and outdoor fireplace is cool to the touch, remove ashes and properly dispose. 2. Store assembled in a cool, dry location away from children and pets. Operating Instructions Outdoor Fireplace Model No. WAD992SP Product Registration For faster warranty service, register your product immediately at or call 1.800.762.1142. Limited Warranty Blue Rhino Global Sourcing, Inc (“Vendor”) warrants...