Stimmen - 2, Durchschnittliche Bewertung: 4
(
)
)
|
Anleitung Zusammenfassung
Use the nuts included with this kit. Attach the lower 564 E bracket (and shim). Use the nuts removed earlier and one of the nuts included with this kit. Repeat steps “a” through “c” for the opposite side. Before installing the face verify the lower grill is centered. Loosen the nuts and adjust if necessary. 3 Pull the electric fireplace out of the mantel (or built-in location). Attach the cove covers and face following the directions below. Slide the fireplace back into place to complete the installation. Lift the face up slightly, tilt it forward and insert the top hooks until the face locks in place. Tilt the face back slightly and insert the bottom hooks into the slots on the fireplace. Page 6 of 6 7/19/07 © Travis Industries, Inc....
Dieses Handbuch ist für folgende Modelle:Kamine - 95400411 (601.91 kb)