Stimmen - 3, Durchschnittliche Bewertung: 5 ( )

Hersteller: Monessen Hearth Dateigröße: 2.24 mb Dateiname: Unterrichtssprache:

The decorative arch kits can not be used in conjunction with the screen panel kit. NOTE: DIAGRAMS & ILLUSTRATIONS ARE NOT TO SCALE. ACCESSORY COMPONENTS (CONTINUED) Termination Shroud Deluxe Termination Square Termination (ref. Form # 750,246M) (ref. Form # 750,055M) (ref. Form # 750,109M) Termination Guard Kits The vent termination guards may be used to cover the vent termination on the exterior of the home to minimize exposure to the hot surface of the termination. Termination Guard Kits (all models) Cat. No. Model No. Description H5820 4.5HTSK Termination Shroud 87L02 SV4.5HGS Termination Guard, Deluxe 17M52 SV4.5HGS-1 Termination Guard, Square Radiant Panel Kits Clean faced radiant panel kits are available to convert the standard louvered fireplaces to radiant models which are more suited for finishing around the firebox opening with non-combustible materials, such as tile. Clean Face Radiant Panel Kits Cat. No. Model No. Description 80L79 CFPKE60 Radiant Panel Kit, End Panel 80L77 CFPK-6/60 Radiant Panel Kit, Front Panel (ref. Form # 750,030M) 3 Piece Trim Kit Cat. No. Model No. Description 96K22 TK40PB3 40" Polished Brass H1816 TK40BS3 40" Brushed Stainless H4823 TK40C3 40" Black Polished Brass Trim Kit This kit contains brass trim pieces used to finish the gaps between the wall board and the fireplace, providing the appliance a brass perimeter highlight. This kit contains the trim pieces and these instructions. Bag of Glowing EmbersBag of Volcanic Stone Replacement ember materials or volcanic stone are available for use with these appliances. Order kits as part of the periodic maintenance of the appliance. Decorative Firebox Accessories Cat. No. Model No. Description 88L53 FGE Bag of Glowing Embers 80L42 FDVS Bag of Decorative Volcanic Stone (FDVS ref. Form #750,010M) PAINT Touch-Up Paint Kit Repair of minor scratches and discoloration of the appliance painted surfaces may be accomplished with the touch-up paint kit. Touch-Up Paint Kits (all models) Cat. No. Model No. Description 90L73 TPK-B Touch-Up Paint (Black) NOTE: DIAGRAMS & ILLUSTRATIONS ARE NOT TO SCALE. LIGHTING INSTRUCTIONS – MILLIVOLT GAS VALVE 6. Wait five (5) minutes to clear out any gas. Then smell for gas, including near the floor. If you smell gas, STOP! Follow “B” in the safety information above (to the left) on this label. If you don’t smell gas, go to the next step. 7. Push in gas control knob slightly and turn counterclockwise to “PILOT.” 8. Push in control knob all the way and hold in. Immediately light the pilot by triggering the spark igniter (pushing the button) until pilot lights. Continue to hold the control knob in for about 1-1/2 minutes after the pilot is lit. Release knob and it will pop back up. Pilot should remain lit. If it goes out, repeat steps 5 through 8. •If knob does not pop up when released, stop and immediately call your service technician or gas supplier. •If pilot will not stay lit after several tries, turn the control knob to “OFF” and call your service technician or gas supplier. 9. Turn gas control knob counterclockwise to “ON.” 10. Close lower control compartment. 11. If the appliance will not operate, follow the instructions "To Turn Off Gas To Appliance" and call your service technician or gas supplier. FOR YOUR SAFETY READ BEFORE LIGHTING A. This appliance has a pilot which must be lit w...

Herunterladen

Geben Sie zwei Ziffern: