Stimmen - 3, Durchschnittliche Bewertung: 3.7
(
)
)
|
Anleitung Zusammenfassung
..... • The LP-gas cylinder used must include a collar • The LP-gas cylinder used must include a collar• The LP-gas cylinder used must include a collar• The LP-gas cylinder used must include a collar• The LP-gas cylinder used must include a collar• The LP-gas cylinder used must include a collar to pr to prto prto prto prto protect the c otect the cotect the cotect the cotect the cotect the cylinder v ylinder vylinder vylinder vylinder vylinder valv alvalvalvalvalve eeeee. ..... • When an LP model is not in use, the LP-gas must • When an LP model is not in use, the LP-gas must• When an LP model is not in use, the LP-gas must• When an LP model is not in use, the LP-gas must• When an LP model is not in use, the LP-gas must• When an LP model is not in use, the LP-gas must be turned of be turned ofbe turned ofbe turned ofbe turned ofbe turned off fffff a aaaaat the supply c t the supply ct the supply ct the supply ct the supply ct the supply cylinder ylinderylinderylinderylinderylinder. ..... • T • T• T• T• T• To e o eo eo eo eo extend the lif xtend the lifxtend the lifxtend the lifxtend the lifxtend the life of e ofe ofe ofe ofe of y yyyyyour P our Pour Pour Pour Pour Pa aaaaatiof tioftioftioftioftioflame lamelamelamelamelame, pr , pr, pr, pr, pr, protect and otect andotect andotect andotect andotect and co cococococov vvvvver it fr er it frer it frer it frer it frer it from the elements when not in use om the elements when not in useom the elements when not in useom the elements when not in useom the elements when not in useom the elements when not in use. ..... W415-0372 / 02.12.03 SPECIFICATIONS SPECIFICATIONS DIMENSIONS Natural LP (Propane) Minimum Inlet Pressure 4.5" w.c. 11.0" w.c. Maximum Inlet Pressure 14.0"w.c 14.0"w.c. Model Fuel Max. Input Btu/Hr GPFN Natural Gas 60,000 GPFP Propane Gas 60,000 INPUT GAS INLET PRESSURES Inches mm Floor 0 0 Side Walls 24 610 Top of unit to ceiling 72 1830 MINIMUM CLEARANCE TO COMBUSTIBLES W415-0372 / 02.12.03 INSTALLATION INSTALLATION The log set and the burner assembly are shipped together. Remove the gas log set and burner assembly and check for damage. DO NOT install damaged components. The logs are fragile use care when handling. Place the Patioflame on a level/secure surface in desired location. This location must be adjacent to the gas supply cylinder. NOTE:Minimum clearances to combustible construction must be maintained. ( See Page 5) You must have clear and easy access to the on/off valve AFTER the appliance is installed and connected to the gas supply in order to safely turn off the burner. THE ON/OFF G THE ON/OFF GTHE ON/OFF GTHE ON/OFF GTHE ON/OFF GTHE ON/OFF GAS V AS VAS VAS VAS VAS VAL ALALALALALVE IS USED T VE IS USED TVE IS USED TVE IS USED TVE IS USED TVE IS USED TO TURN THE O TURN THEO TURN THEO TURN THEO TURN THEO TURN THEB BBBBBURNER ON AND OFF URNER ON AND OFFURNER ON AND OFFURNER ON AND OFFURNER ON AND OFFURNER ON AND OFF. ..... NATURAL GAS Connect the incoming gas supply line to the on/off gas valve of the appliance. Make certain ALL gas connections are tight, turn the on/off valve at the unit slowly to the on position and use soap water to test for leaks. DO NOT USE AN OPEN FLAME. LP GAS 1. Place the cylinder in the ring on the base. Base should be on level surface. 2. Make sure tank valve is in its full off position. (Turn clockwise to stop). 3. Check tank valve features to ensure it has proper external mating threads. (Tank Valve Marked: USE WITH TYPE 1) 4. Inspect hose shipped with the unit for damage. Never attempt to use damaged or plugged equipment. See your local LP Gas Dealer for repairs. 5. After inspecting the LP hose shipped with the unit, connect the end with the female fitting on the hose to the male fitting on the on/off gas valve at the end of the flex tube. Tighten fittings using 2 wrenches. 6. When connecting regulator assembly to the tank valve, hand tighten black QCC1 nut clockwise to a positive stop. DO NOT use a wrench to tighten. Use of a wrench may damage the quick closing coupling nut and result in a hazardous condition. 7. Locate the hose out of pathways where people may trip over it or in areas where the hose may be subject to accidental damage. 8. Open tank valve fully (counter-clockwise). Turn the on/off valve at the unit slowly to the on position and use a soapy water solution to check all connections for leaks before attempting to light the appliance. If a leak is found, turn tank valve off and do not use the appliance until repairs can be made. W415-0372 / 02.12.03 ENCLOSURES FOR LP GAS SUPPLY SYSTEMS If you build an enclosure for an LP gas cylinder, follow these recommended specifications. You must also follow local codes. Enclosures for LP gas supply cylinders shall be ventilated by openings at the level of the cylinder valve and at floor level. The effectiveness of the opening(s) for purposes of ventilation shall be determined with the LP gas supply cylinder(s) in place. This shall be accomplished by one of the ...
Dieses Handbuch ist für folgende Modelle:Kamine - GPFN (163.83 kb)