Stimmen - 3, Durchschnittliche Bewertung: 3.7 ( )

Hersteller: Lennox Hearth Dateigröße: 577.5 kb Dateiname: Unterrichtssprache:

Fireplace models LSm40-2, LSm45-2, LSm40-PV, LSm45PV: Remove the front three logs indicated in Figure 3. Note:LogsareFRAGILE!Handlewithcaretopreventbreakage. For fireplace models LSm40ST and LSm40ST-PV: Log removal is not necessary. Figure 3 Fireplace models LSM40-2, LSM45-2, LSM40-PV, LSM45-PV: Remove front three logs before installing andirons. Step 4. Install andirons as described in Figure 4. To install andirons in montebello Front View fireplace models LSm40-2, LSm45-2, LSm40-PV and LSm45PV: 1) Loosen thumbscrews by turning them counterclockwise (do not remove thumbscrews). 2) Place andirons onto grate as shown above in Detail A and B. 3) Turn thumbscrews clockwise until snug (do not overtighten). Also see Figure 5. To install andirons in montebello See-Through fireplace models LSm40ST and LSm40ST-PV: 1) Remove thumbscrews by turning them counterclockwise. Discard thumbscrews. 2) Place andirons onto grate as shown above in Detail A. Also see Figure 6. Thumbscrew Andirons (Classic style shown) Grate Assembly Figure 4: Installing Andirons Grate Assembly DETAIL A ~~ DETAIL b Andiron (Classic style) (Side View) Step 5. Fireplace models LSm40-2, LSm45-2, LSm40-PV, LSm45PV: Reinstall the logs removed in Step 3. For details, refer to the log placement instructions in the fireplace Installation Instructions. Note:LogsareFRAGILE!Handlewithcaretopreventbreakage. Step 6. See Figure 2.Reinstall the front glass door assembly, as follows: a. Retrieve the glass door assembly. Visually inspect the gasket on the backside of the frame to ensure it is clean, free of irregularities, and firmly seated on the frame. b. Position the door assembly in front of the firebox opening with the top of the door held away from the fireplace, as shown in Figure 2. Lower the bottom of the door assembly onto the bottom door track. Pivot the door up after engaging and centering in the base channel. c. Using a Phillips screwdriver, fasten the door frame to the door latch with the two (2) latch screws removed in Step 2. WARNING: Risk of personal injury or property damage. To prevent glass door assembly from falling out, securely tighten latch screws when reinstalling. (Also see WARNING box on Page 1.) Step 7. If applicable, reinstall the mesh pull screen assembly removed in Step 1, as follows: a. Reattach both mesh pull screens to the rod. b. Insert the right side of the rod into the corresponding hole on the upper right side of the firebox opening. c. Insert the left side of the rod into the corresponding hole on the upper left side of the firebox opening. mesh Pull Screens mission Andirons Installed in Front View Fireplace Figure 5 Classic Andirons (2 sets) Installed in See-Through Fireplace Figure 6 NOTE: DIAGRAMS & ILLUSTRATIONS ARE NOT TO SCALE. Lennox Hearth Products reserves the right to make changes at any time, without notice, in design, materials, specifications, and prices, and to discontinue colors, styles, and products. Consult your local distributor for fireplace co...

Herunterladen

Geben Sie zwei Ziffern: