Stimmen - 3, Durchschnittliche Bewertung: 3.7
(
)
)
|
Anleitung Zusammenfassung
2. Do not operate this heater in explosive atmospheres, such as in the presence of flammable liquids, gases, or dust. ITEM DESCRIPTION Power Requirements 120 VAC, 60 Hz, 15 Amps Heater Settings 750 and 1500 Watts Heater Controls Fan On/Off switch; 2 -2750W On/Off switches; Fire light On/Off switch; Temperature thermostate knob; Fire light brightness knob; Remote Control Unit Line Cord Two-prong polarized plug; 16 AWG x 2C; UL listed Light Bulbs 2 - 60W candelabra bulbs Overall Dimensions 20-3/8 (L) x 11-1/2 (W) x 22-3/4 (H) inches Weight 39 Lbs. The maximum room size of the heater is 400 square foot. REV 07j; 08d Electrical Safety 3. Avoid body contact with grounded surfaces such as pipes, radiators, ranges, and refrigerators. There is an increased risk of electric shock if your body is grounded. 4. Do not expose appliances to rain or wet conditions. Water entering a appliance will increase the risk of electric shock. 5. Grounded products must be plugged into an outlet properly installed and grounded in accordance with all codes and ordinances. Never remove the grounding prong or modify the plug in any way. Do not use any adapter plugs. Check with a qualified electrician if you are in doubt as to whether the outlet is properly grounded. If the product should electrically malfunction or break down, grounding provides a low resistance path to carry electricity away from the user. 6. Double insulated appliances are equipped with a polarized plug (one blade is wider than the other). This plug will fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician to install a polarized outlet. Do not change the plug in any way. Double insulation eliminates the need for the three wire grounded power cord and grounded power supply system. 7. Do not abuse the Power Cord. Never use the Power Cord to pull the Plug from an outlet. Keep the Power Cord away from heat, oil, sharp edges, or moving parts. Replace damaged Power Cords immediately. Damaged Power Cords increase the risk of electric shock. Personal Safety 8. Stay alert. Watch what you are doing, and use common sense when operating this product. 9. Avoid accidental starting. Be sure the Fan Switch is off before plugging in. Tool Use and Care 10. Do not use this appliance if any switch or thermostat does not work properly. 11. Disconnect the Power Cord Plug from the power source before making any adjustments to the appliance. Such preventive safety measures reduce the risk of starting the appliance accidentally. Service 12. Appliance service must be performed only by qualified repair personnel. Service or maintenance performed by unqualified personnel could result in a risk of injury. 13. When servicing an appliance, use only identical replacement parts. Follow instructions in the “Inspection, Maintenance, And Cleaning” section of this manual. Use of unauthorized parts or failure to follow maintenance instructions may create a risk of electric shock or injury. SPECIFIC SAFETY RULES FOR THIS PRODUCT 1. Maintain labels and nameplates on the Fireplace Heater. These carry important information. If unreadable or missing, contact Harbor Freight Tools for a replacement. 2. Avoid fires and explosions. Never place the Fireplace Heater near room curtains or other flammable materials. The floor on which the Fireplace Heater sits must be nonflammable and free of debris. Never use near flammable vapors or liquids. 3. Maintain a safe working environment. Keep the work area well lit. Make sure there is adequate surrounding space. Always keep the work area free of obstructions, grease, oil, trash, and other debris. Do not use this product in areas near flammable chemicals, dusts, and vapors. Do not use this product in a damp or wet location. 4. Avoid unintentional starting. Make sure you are prepared to begin work before turning on the Fireplace Heater. 5. Do not force the Fireplace Heater. This product will do the work better and safer at the capacity for which it was designed. 6. Always unplug the Fireplace Heater from its electrical outlet before performing and inspection, maintenance, or cleaning procedures. 7. Never leave the Fireplace Heater unattended while running. Turn power off if you have to leave the room. 8. Use proper extension cord. If an extension cord is used, use the proper type as listed in the table on page 7. Keep extension cord off the ground and away from water. 9. Connect to a GFCI outlet. Always connect the Line Cord to a Ground Fault Circuit Interrupter (GFCI) protected electrical outlet. GROUNDING Note: This product comes with a two-prong, polarized plug. WARNING! Improperly connecting the grounding wire can result in the risk of electric shock. Check with a qualified electrician if you are in doubt as to whether the outlet is properly grounded. Do not modify the power cord plug provided with the tool or product. Never remove the grounding prong from the plu...