|
Anleitung Zusammenfassung
This is an unvented gas-fired heater. It uses air (oxygen) from the room in which it is installed. Provisions for adequate combustion and ventilation air must be provided. Refer to Combustion and Ventilation Air Section, Page 3. Due to high temperatures, the appliance should be located out of traffic and away from furniture or draperies. Do not place clothing or other materials on or near this appliance. IMPORTANT: READ AND UNDERSTAND THESE INSTRUCTIONS COMPLETELY BEFORE INSTALLING YOUR UNVENTED ROOM HEATERS. TABLE OF CONTENTS TABLE OF CONTENTS 2 General Information ......................... page 2 Inventory ......................................... page 2 Tools/Building Supplies ................... page 2 Important Safety Information .......... page 2 Codes .............................................. page 3 Combustion and Ventilation Air ....... page 3 Location of firebox........................... page 4 Clearances ....................................... page 4 Assembly Steps ............................... page 5 Gas Line Installation ........................ page 5 Firebox Framing ............................... page 6 UVF-500 Specifications ................... page 6 Firebox Installation .......................... page 7 UVF-600 Specifications ................... page 7 Framing Specifications .................... page 8 Canopy Installation .......................... page 9 Optional Equipment ......................... page 9 Firebox finishes ............................... page 10 Replacement Parts .......................... page 10 Accessories/Components ................ page 10 Replacement Parts List .................... page 11 GENERAL INFORMATION These ventless firebox enclosures are designed to accept all ANSI Z21.11.2 approved Decorative Type Unvented Gas Log Room Heaters. For the appropriate Unvented Gas Log Room Heater model, refer to the chart below. Refer to the installation instructions provided with the log sets for detailed instructions. The UVFC Series are unvented fireboxes. They feature a self-contained heat-circulating system. The UVFR Series is a conventional radiant- heat unvented firebox. This installation manual will enable you to obtain a safe, efficient and dependable installation of your room heater system. Do not alter or modify the firebox or its components under any circumstances. Any modification or alteration of the firebox system, including but not limited to the firebox and accessories, may void the warranty, listings and approvals of this system and could result in an unsafe and potentially dangerous installation. These Built-In Unvented Fireboxes have been tested and approved as Ventless Firebox Enclosures for Gas-Fired Decorative Type Ventless Room Heaters to IAS 2-97. WARNING: THESE BUILT-IN UNVENTED FIREBOXES HAVE ONLY BEEN TESTED AND APPROVED FOR USE WITH ANSI Z21.11.2 UNVENTED GAS LOGS. DO NOT ATTEMPT TO BURN SOLID WOOD FUELS, OTHER GAS LOG SETS OR ANY OTHER COMBUSTIBLE MATERIALS IN THIS UNVENTED FIREB...
Dieses Handbuch ist für folgende Modelle:Kamine - UNVENTED FIREBOXES UVFC-500 (2.24 mb)
Kamine - UNVENTED FIREBOXES UVFC-500 (2.24 mb)
Kamine - UNVENTED FIREBOXES UVFC-500 (2.24 mb)
Kamine - UNVENTED FIREBOXES UVFC-600 (2.24 mb)