Stimmen - 4, Durchschnittliche Bewertung: 3.5 ( )

Hersteller: Xantrex Technology Dateigröße: 5.8 mb Dateiname: Standard_CPF_Manual.pdf Unterrichtssprache:

FCC Compliance Statement This device complies with Part 15 of the FCC limits for Class A digital devices. This equipment generates, uses, and can radiate radio frequency energy and, if not installed or used in accordance with the instructions may cause harmful interference with radio communications. There is no guarantee that interference will not occur in a particular instance. If this equipment does cause harmful interference to other equipment, try to correct the problem by relocating the equipment. Consult an authorized STANDARD HORIZION dealer or other qualified service technician if the problem cannot be corrected. Operation is subject to the following conditions: (1) This device cannot cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Copyright 2009. VERTEX STANDARD CO., LTD. All rights reserved. Printed in Italy. No portion of this manual may be reproduced without the permission of VERTEX STANDARD CO., LTD. OM CODE: S4igSH5c_0ww 16.00aA77 & S4igSH8wc_0ww 16.00aB33 -100409 CAUTION -The GPS Chart Plotter is designed for maritime use. To avoid water intrusion ensure the C-MAP BY JEPPESEN C-CARD door is completely closed. -Extensive exposure to heat may result in damage to the GPS Chart Plotter. -The GPS Chart Plotter contains dangerous high voltage circuits which only experienced technicians can handle. -STANDARD HORIZON will not be liable for errors contained herein, or for incidental or consequential damages in connection with the performance or use of this material. CLEANING PROCEDURE FOR THE GPS CHART PLOTTER SCREEN Cleaning of the chart plotter screen is a very important operation and must be done carefully. Since the surface is covered by a antireflective coating, the procedure for cleaning all the surfaces can be performed using the following procedure: You need a tissue or lens tissue and a cleaning spray (Windex) containing Isopropanol (a normal spray cleaner sold for the PC screen, for example PolaClear by Polaroid). Fold the tissue or lens tissue into a triangular shape, moisten the tip and use the index finger behind a corner to move the tissue across the surface, in overlapping side to side strokes. If the tissue is too wet, a noticeable wet film will be left in its path and you will need to repeat the process. If too dry, the tissue won’t glide easily, and may damage the surface. TABLE OF CONTENTS 1. INTRODUCTION ...................................................................................................... 13 1.0 GENERAL INFORMATION .................................................................................... 13 1.1 PACKING LIST ...................................................................................................... 13 1.1.0 CPF180i Packing List ................................................................................ 14 1.1.1 CPF300i Packing List ................................................................................ 14 1.2 OPTIONAL ACCESSORIES .................................................................................. 14 1.3 OPTIONAL DOME OR OPEN ARRAY RADAR ANTENNAS................................14 2. INSTALLATION ...................................................................................................... 17 2.0 MOUNTING THE GPS CHART PLOTTER ............................................................ 17 2.1 BRACKET MOUNTING .......................................................................................... 17 2.2 FLUSH MOUNTING................................................................................................18 2.3 MOUNTING THE OPTIONAL EXTERNAL GPS ANTENNA ................................. 19 2.3.0 Flush mounting the antenna ...................................................................... 20 2.4 CONNECTIONS ..................................................................................................... 21 2.4.0 Connection Table FOR CPF180I.................................................................21 2.4.1 Connection FOR CPF180I ........................................................................... 22 2.4.2 Connection Table FOR CPF300I.................................................................23 2.4.3 Connection FOR CPF300I ........................................................................... 23 2.5 BATTERY CONNECTIONS ................................................................................... 24 2.6 NMEA CONNECTIONS .......................................................................................... 24 2.7 GPS POSITION ON A VHF RADIO ....................................................................... 25 2.8 RADAR ANTENNA (USA ONLY) ........................................................................... 25 2.9 PERSONAL COMPUTER CONNECTIONS...........................................................25 2.10 NMEA DATA PAGE .....................................

Herunterladen

Geben Sie zwei Ziffern: