Stimmen - 3, Durchschnittliche Bewertung: 4 ( )

Hersteller: Kambrook Dateigröße: 161.66 kb Dateiname: 5a938979-419b-c3e4-ad5b-13e20b868740.pdf Unterrichtssprache:

• Do not touch hot metal surfaces. • Do not allow power cord to contact hot metal surfaces. • Set the control setting to the OFF position then Unplug and allow heater to cool down before cleaning or storing. • The heater will not operate unless it is placed on a flat level surface as it is fitted with a tilt switch. • Do not use the heater with a programmer, timer or any other device that switches the heater on automatically, since a fire risk exists if the heater is covered or positioned incorrectly. • Use this heater only as described in this instruction manual.Any other use not recommended by the manufacturer may cause fire, electric shock or injury and voids all warranties. • Always move the heater with the handle provided. • Do not operate the heater with the cord hanked or wound around any part of the heater or in contact with heated sufaces of the heater. 2 HOW TO OPERATE 1. Remove your heater from the packaging, unwind the cord to its full length. 2. Read all the instructions fully before plugging the unit in. 3. Place the heater on a level surface in a stable position. Make certain the heater element control switch is in the OFF position. 4. Remove any element support Guards (ie Foam or paper packing). 5. Plug the power cord in a 240Volt outlet, and switch the power outlet on. 6.The heater control panel is located at the right hand side of the unit, underneath the plastic flap (for safety). 7.To operate the control dial,lift the plastic flap. Use the control dial to switch the heater to the desired setting. TEMPERATURE SETTING 1. Model Numbers KRH150 & KRH200 KRH150 & KRH200 have 2 temperature settings. Setting 1 – Turn the control dial to the low setting to heat the lower element only. Setting 2 – Turn the control dial to the high setting to heat both elements. 2. Model Number KRH240 KRH240 has 3 temperature settings Setting 1 – Turn the control dial to the low setting to heat the lower element only. Setting 2 – Turn the control dial to the medium setting to heat the bottom and middle elements. Setting 3 – Turn the control dial to the high setting.This will operate all elements. Note:There is a tip over switch on the base.When the heater tips over, it will turn off automatically. CARE AND MAINTENANCE • Always turn off and switch off at power outlet then unplug the heater before cleaning. • Use only a clean, dry cloth to clean the external surface of the heater only. • Do not attempt to remove the front grill of the heater. • Use a vacuum cleaner regularly to remove dust and fluff from the element and grill. • If the unit has accumulated dust around the elements and grill that cannot be removed with the use of a vacuum cleaner, have a qualified service agent clean the unit. DO NOT operate the heater in this condition. • Do not attempt to open the case of the heater at anytime, there are no customer serviceable parts inside. • When not in use, pack the heater in its original box for best protection and store in a cool, clean and dry locat...

Herunterladen

Geben Sie zwei Ziffern: