Stimmen - 2, Durchschnittliche Bewertung: 4.5
(
)
)
|
Anleitung Zusammenfassung
This compact KVM Switch with Audio and Mic switching functionality allows you to access, control, boot and reboot two (Model 157025) or four (Model 157032) USB-enabled multimedia computers with only one USB keyboard, mouse, monitor and optional speaker set and microphone, using the Switching Software Client installed on your PCs. INSTALLATION 1. Insert the enclosed CD into your CD drive. The installer program, USBKVMIn.exe, will run (or you can find it with Explorer and double-click its icon to start installation). Complete the software installation on each PC to be connected to the switch. When completed, you’ll see a KVM Switcher icon on the system tray of the desktop. Right-click to display the operation menu; double- click to display the configuration box. (See KVM Switcher section for details.) Current active PC channel is on port 1 (or 2, 3 or 4) No live connection detected 2 3 NOTE: The KVM Switcher software supports only the Windows operating system on PC platforms. For other OS platforms, such as Linux, you can still use the keyboard hotkey — ScrLk + ScrLk — to switch PCs. However, this switching hotkey is not available on non-PC platforms such as MacOS. When connected to a Mac, use the face-panel button to switch ports. 2. Connect the shared USB keyboard, mouse, monitor, speaker/headphone and microphone each to its port on your KVM Switch. 3. Connect each KVM PC port to a computer using the slim 3-in-1 KVM combo cable and the audio/ mic cable. Once you have connected the switch and computers properly, you can operate the KVM Switch. NOTE: Some older computers with a USB interface may need to manually enable the USB option in the BIOS settings before using any USB devices. If your USB interface does not work, check the USB option status in the BIOS. NOTE: If using Windows 95/98/SE without a USB mouse, an error message may appear saying that a mouse is not detected and giving you the option of ignoring the same message in the future. Since you likely would have no mouse movement to disable this message, it’s recommended that a USB mouse be installed on your computer before connecting it to this KVM Switch. OPERATION There are three ways to control PC switching: using the face-panel push buttons, hotkey sequences or the KVM Switcher software. (For audio/mic switching, use the hotkey command.) Face-Panel Buttons The face-panel buttons allow you direct control over PC port switching. Simply press the button to switch to the corresponding PC port (and audio/mic channel, if binding is enabled). By default, PC port switching and audio/mic port switching are bound together. NOTE: You can use the face-panel button to switch to an empty port that is not connected with any computer. Normally, if you use keyboard hotkeys or the KVM Switcher software, you will not be able to switch to an empty port. Keyboard Hotkeys A user-definable keyboard hotkey sequence for a PC consists of at least three specific keystrokes: Ctrl + Alt + [command key] For other operating systems on a PC, such as Linux, you can use this universal hotkey sequence: ScrLk + ScrLk 4 NOTE: The universal hotkey is not available for Mac. And neither the universal hotkey nor user- definable hotkeys allow you to switch to an empty port that is not connected with any computer. To switch to an empty port, just press the corresponding face-panel button. Each keystroke within a hotkey sequence should be pressed within 2 seconds. Otherwise, the hotkey sequence will not be validated. After switching ports, wait for the KVM Switch icon to show the target port before switching again. The icon can be found on the system tray of your Windows desktop after its installation. Hotkeys are functional only after you...
Dieses Handbuch ist für folgende Modelle:elektrische Heizungen - KVM 157032 (486.1 kb)