Stimmen - 2, Durchschnittliche Bewertung: 4
(
)
)
|
Anleitung Zusammenfassung
60HZ 1200 WATTS IMPORTANT SAFEGUARDS When using electrical appliances, basic precautions should always be followed to the reduce the risk of fire, electric shock, and injury to persons, including the following: 1. Read all instructions before using this heater. 2. If your appliance is equipped with a polythene tape used as carry handle, remove it before connecting the appliance to the outlet. 3. This heater is hot when in use. To avoid burns, do not let bare skin touch hot surfaces. Use the built-in handle when moving this heater. Keep combustible materials, such as furniture, pillows, bedding, papers, clothes, and curtains at least 3 feet (0,9 m) away from the front, top, sides and rear of the heater. 4. Extreme caution is necessary when the heater is used by or near children and whenever the heater is left operating unattended. 5. Always unplug heater when not in use. 6. Do not operate any heater with a damaged cord or plug or after the heater malfunctions, has been dropped or damaged in any manner. If heater has leaked any oil, discontinue using the heater and contact the service center as indicated in the instruction leaflet. Return heater to authorized service facility for examination, electrical or mechanical adjustment, or repair. 7. Do not use outdoors. 8. Never place this heater where it may fall into a bathtub or any other water container. 9. Do not run the power cord under carpeting. Do not cover the power cord with throw rugs, runners, or the like. Arrange cord away from traffic area and where it will not be tripped over. 10. To disconnect heater, turn controls to off, then unplug it. 11. Connect to properly polarized outlets only. 12. Do not insert or allow any foreign object to enter the air intakes or the exhaust as this may cause an electric shock, the risk of fire, or damage to the heater. 13. To prevent the risk of fire, do not block air intakes or exhaust in any manner. Do not use on soft surfaces, like a bed, where air openings may become blocked. 14. A heater has hot or arcing or sparking parts inside. Do not use it in areas where gasoline, paint, or flammable liquids are used or stored. 15. Use this heater only as described in this manual. Any other use not recommended by the manufacturer may cause the risk of fire, electric shock, or injury to persons. 16. To prevent overload and blown fuses, be sure that no other appliance is plugged into the same outlet or into another outlet wired into the same circuit. 17. It is normal for the heater’s plug and cord to feel warm to the touch. A plug or cord which becomes hot to the touch or becomes distorted in shape may be the result of a worn electrical outlet. Worn outlets should be replaced prior to further use of the heater. Plugging heater into a worn outlet may result in overheating of the power cord or fire. 18. This heater is not intended for use with an extension cord. Plug the cord directly into an appropriate wall outlet. 19. Be sure that the plug is fully inserted into an appropriate outlet. Please remember that outlets also deteriorate due to aging and continuous use: check periodically if signs of overheating or deformations are present on the plug. If the oulet is deteriorated or damaged, do not use it and CALL your electrician. 20. Check that neither the appliance nor the power cable have been damaged in any way during transportation. 21. Make sure that no pieces of polystyrene or other packaging material have been left between one element of the appliance and another. 22. When switching on the appliance for the first time, allow it to run at full power for at least two hours to get rid of the unpleasant smell. Make sure that the room in which the appliance is located is well ventilated during this operation. It is normal for the appliance to emit small crackling sounds when you turn it on for the first time. 23. CAUTION: to prevent electric shock match wide blade of plug to wide slot, then fully insert. 24. Do not cover the appliance while it is functioning in order to avoid overheating and the risk of fire. SAVE THESE INSTRUCTIONS HOW TO USE BE CAREFUL Operate the heater in upright position only. Any other position could create hazardous situations! ON/OFF Switches POWER ECONOMIZER For more economical use, the Min. or Med. power switches may be used individually, after unit has reached the operating temperature. 700 500 WATTS WATTS With pilot lights ON, the heater is ON! 1. LOCATION Place the heater on the floor beneath the coldest window in the room or any desired location. Your heater will minimize the effect of cold drafts. The heater must not be located immediately below an outlet. Do not use this heater in rooms having a surface area less than 45 sq. ft (4 m2). 2. CONNECTION The radiator must be connected to a properly polarized A/C 110/120 V household outlet in perfect working conditions. Keep loose clothing or bedding, furniture and flammable material away from the wall outlet where the heater plug is fitted in. 3. GROUND...