Stimmen - 2, Durchschnittliche Bewertung: 4 ( )

Hersteller: Scarlett Dateigröße: 182.01 kb Dateiname: Unterrichtssprache:

Pull on the plug, not on the cord. • Do not use out of the room. • Do not insert and pull out the plug with wet hand, as this may cause electrical shock. • The oil heater must be used only in the upright position. • The unit should be far away from the object flammable or easy deformated objects during uses. • Unit surface temperature of the appliance is high, thus do not touch it, except the handle. 2 CAUTION: • Do not cover the appliance when is use. ASSEMBLING • First put the unit upside down. • Install multidirectional rolling wheels to each end between the first and the second groups of the radiating flanges. • Let the “U” shape screw surrounding the dome of the radiating flanges. Then insert it into two holes of the supporting plate. • Insert the butterfly nuts and screw them tightly counter clockwise. USING THE APPLIANCE • Set the thermostat to “0” position and power selector to “0” position, insert the plug to the power supply. POWER SELECTOR • You can adjust power of work of an oil heater, using power regulator: - “0” - Off; - “1“ - minimal power; - “II” - medium power; - “1“ and “II” simultaneously - maximum power. THERMOSTAT • Set the thermostat to position. • When the temperature rises to which you are satisfied with, slowly turn the thermostat counterclockwise until the indicator lights is out, and the room temperature thus can keep constant. • If you want to change the room temperature, you can make another regulation: turn the thermostat clockwise to rise the temperature and counterclockwise to lower it, or turn the power selector to “0” position. FAN SWITCH • This appliance is equipped with additional function for convection warm air. To activate this function, simply press the fan switch in front of the oil heater. - BbiKn. - Off; - BKn. - On. MODEL POWER REGULATION RANGE (W) SC-050 800/1200/2000 SC-052 1000/1500/2500 3 NOTES: • The room must be closed in good condition, if not, it will not make good result because of the influx of heat. • After use, turn the power selector to the “0” position, then turn the thermostat to the “0” position and unplug from power supply. CLEAN AND CARE_ • The oil heater should be cleaned regularly to wipe out the dust on the surface of fins. As this may result the radiating efficient. • Unplug from the power supply and allow the appliance to cool down. • Wipe out with a soft damp cloth. Do not use detergent or abrasives. • Do not scrap the surfaces of fins with sharp hard tools, to avoid surfaces getting rusty, because of damage of the paint coat. STORAGE • Ensure the oil heater is completely cool. • Store the appliance in a cool, dry place. SPECIFICATION Power supply 230 V, 50 Hz Power SC-050 800 W / 1200 W / 2000 W SC-052 1000 W /1500W / 2500 W Net/ Gross weight: SC-050 10.08 kg / 11.4 kg SC-052 12.08 kg / 13.4 kg Radiating fins quantity: SC-050 9 SC-052 11 Gift box dimension (L x W x H): SC-050 495 mm x 150 mm x 675 mm SC-052 580 mm x...

Herunterladen

Geben Sie zwei Ziffern: