Stimmen - 6, Durchschnittliche Bewertung: 4 ( )

Hersteller: Cadet Dateigröße: 3.88 mb Dateiname: Unterrichtssprache:

Sooting and other problems may result if the logs are not properly and firmly positioned in the appliance. Refer to Figure 1 and Figure 1A for the following warning. Warning: Failure to position the parts in accordance with this diagram or failure to use only parts specifically approved with this appliance may result in property damage or personal injury. PROPER INSTALLATION SEQUENCE: LS-(18,24,30)B2-1: (Figure 1) 1. Place rear (#1) log onto two (2) pins on rear log support. 2. Place left, front (#2) log onto two (2) left, front pins on burner pan. 3. Place right, front (#3) log onto two (2) right, front pins on burner pan. 4. Place Y Branch (#4) onto two (2) pins on rear log. 5. Compare the completed log installation with the appropriate photo from pages 7 through 9. Review previous steps to make any necessary adjustments. 6. Log placement is completed. Replacement Loose Material (glowing embers) Part Number Note: A single layer of embers is to be used when applying Platinum Bright Embers (alone or in combination with production embers) to the burner. Log Placement LS-(18,24,30)B2-1 Figure 1 The following WARNING applies when log set is installed onto an unvented gas burner assembly. WARNING: This appliance is equipped for (natural or propane) gas. Field conversion is not permitted. 1 2 3 4 LS-18B 15999 LS-24B 15970 LS-30B 15970 Platinum Bright Embers PE-20-1 BIRCH LOG PLACEMENT D o not cover any large rear ports withloose material (glowing embers) Photo 1 Do not cover any large front ports withloose material (glowing embers) Photo4EMBER PLACEMENT LS-18B2 PHOTOS Photo2 Photo3 Page 6 21088-2-0706 Photo1Photo2Donotcoveranylargerearportswithloosematerial(glowingembers) Donotcoveranylargefrontportswithloosematerial(glowingembers) Photo1Photo2Donotcoveranylargerearportswithloosematerial(glowingembers) Donotcoveranylargefrontportswithloosematerial(glowingembers) EMBER PLACEMENT LS-24B2 PHOTOS Photo4 Photo3 21088-2-0706 Page 7 EMBER PLACEMENT LS-30B2 PHOTOS Do not cover any large rear ports withloose material (glowing embers) Photo 2 Photo1 Do not cover any large front ports withloose material (glowing embers) Photo3Photo4 Page 8 21088-2-0706 BIRCH PARTS LIST & PARTS VIEW Attention: When ordering parts, it is very important that part number and description of part coincide. Index Part No. Number Description BIRCH LOG SETS LS-18B2 1 R8331 Rear Log 2 R8329 Left Front Log 3 R8330 Right Front Log 4 R8332 Y Branch LS-24B2 1 R8335 Rear Log 2 R8333 Left Front Log 3 R8334 Right Front Log 4 R8336 Y Branch LS-30B2 1 R8288 Rear Log 2 R8337 Left Front Log 3 R8338 Right Front Log 4 R8339 Y Branch 1234 USE ONLY MANUFACTURER'S REPLACEMENT PARTS. USE OF ANY OTHER PARTS COULD CAUSE INJURY OR DEATH. HOW TO ORDER REPAIR PARTS Parts can be ordered only through your service person or dealer. For best results, the service person or dealer should order parts through the distributor. Parts can be shipped directly to the service person/dealer. All parts listed in the Parts Lis...

Herunterladen

Geben Sie zwei Ziffern: