Stimmen - 2, Durchschnittliche Bewertung: 3 ( )

Hersteller: Well Traveled Living Dateigröße: 2.11 mb Dateiname: Unterrichtssprache:

Never use corrosive or solvent cleansers or immerse in water. Wait until the unit is completely dry before use. • Any maintenance or repairs including replacing the halogen tube should only be carried out by a competent person. STORAGE If the heater will not be used for a long period of time, store it in a cool, dry location. To prevent dust and dirt build-up, use the original packaging to repack the heater. 17. DO NOT cover the heater with anything during operation or until if has completely cooled. 18. Don't wrap the power supply cord aroud the heater. 19. The heater must be handled with care, and avoid vibration or hitting. 20.The heater must be securely grounded during operation. 21. If the heater gets damaged, it must be repaired by a professional . 22. When the power supply cord is damaged, it must be replaced by an authorized agent or other professional to avoid danger. 23. The heater must not be positioned under a socket. 24. When assembling, keep clear from any flammable and combustible material. 25. Not for use by unsupervised children. 26. It is not safe to install the heater by a swimming pool, or in a bafhroom/shouer area. 27. The heater is for household use only. It is not safe to use on a building site, greenhouse, barn or stable where there's flammable dust. 28.The head of the heater is at high temperature during operation. Unplug the unit and wait till it cools before cleaning. 29. Don't use this heater in places where causticity or volatile air exists, i.e., dust, steam, gas, etc. 30. Don't use this heater as a cloth dryer or towel dryer. 31. Don't use this heater as a sauna heater. 32. Don't use this heater as a room heater. 33. Don't use this heater in places of animal propagating and raising. 34. Don't immerse this heater into water for cleaning. 35. The heater should be plugged into a socket, which is easily visible and reachable. 36.Two dark points may exist on the surface of the heating elements during the first few minutes after it is turned on. This is normal, and will not affect the performance of the unit. 37. A tilt switch is fitted inside the unit for safety purposes. STEP 3: Connect the middle pole with the bottom pole by screwing together. STEP 4: Connect the top pole with the middle pole by screwing together. I (II STEP 5: Place the power cord plug through the top pole, middle pole and bottom pole. Pull the power cord through the bottom of the base as far as it will go. Place the lamp head assembly onto the top pole. Secure it with two 8 mm screws. o Step 7: Fix the power cord on the rubber base by using four 15 mm screws. full assembled view © A WARNING: Only use this halogen heater on a firm solid horizontal surface where all the feet on the base are in contact with the floor. (Should the heater be tilted or fall over, The auto cut-off switch will activate). 1. Sit the heater outside or in a large open area and well away from any obstructions such as branches or where t...

Herunterladen

Geben Sie zwei Ziffern: