Stimmen - 5, Durchschnittliche Bewertung: 4 ( )

Hersteller: Well Traveled Living Dateigröße: 1.45 mb Dateiname: Unterrichtssprache:

If after 1 pressing the igniter button. Variable control knob can minute , you are be released after the pilot flame has been lit unable to light the for 20~30 seconds. burner, wait 5 minutes · Pilot flame can be watched and checked from the and allow flammable peephole located on the base of burner. vapors to dissipate ·If the pilot flame does not light or it goes out, repeat before attempting to light heater again. Step 3. If the burner flame goes out accidentally or it is blown out by wind, turn off the heater and wait at least 5 minutes or more to let the gas dissipate before relighting to avoid possible gas explosion. Repeat steps 2 to 4. ·WARNING: Failure to follow this lighting procedure may result in flame roll out beyond the emitter grid. - 12 OPERATION OPERATION TO TURN OFF THE HEATER. 1. Press and turn the control knob to “OFF” position. 2. Turn off the valve on the LPG cylinder and disconnect the cylinder from the heater. - 13 OPERATION OPERATION CAUTION: Avoid inhaling fumes emitted from the heater’s first use. Smoke and odor from the burning of oils used in manufacturing will appear. Both smoke and odor will dissipate after approximately 30 minutes. The heater should not produce thick black smoke. Note: The burner maybe be noisy when initially turned on. To eliminate excessive noise from the burner, turn the control knob to the “LOW” position, then turn the knob to the level of heat desired. Warning : White smoke may appear around the radiant head during the first minutes of the initial firing. When heater is ON: Emitter screen will become bright red due to intense heat. The color is more visible at night. Burner will display tongues of blue flame. These flames should not be yellow or produce thick black smoke, indicating an obstruction of airflow through the burners. If the flame is very small, this indicates the supply pressure is not enough. Relighting the heater: 1) Turn the control knob to “OFF” position. 2) Wait five (5) minutes before attempting to relight pilot. 3) Repeat steps beginning with step 2 on page 12. Before leaving the heater unattended: 1) Turn the control knob to “OFF” position and turn LPG cylinder to “OFF” position. 2) Never leave the patio heater unattended while in use. Shut down instructions: 1) Push in and turn control knob clockwise to “OFF” position. 2) Turn LPG cylinder valve clockwise to “OFF” position when heater is not in use. NOTE: After use, some discoloration of the emitter screen is normal. If you suspect gas leakage: 1) Turn the control knob to “OFF” position. 2) Turn LPG cylinder valve to “OFF” position. 3) Wait 5 minutes to allow gas to dissipate. 4) If odor continues, immediately call gas supplier. DO NOT use the heater. Warning: Heater will be hot after use. Handle with extreme care until completely cooled. - 14 LOCATION OF HEATER WHILE IN USE LOCATION OF HEATER WHILE IN USE CAUTION: WHEN CERTAIN MATERIALS OR ITEMS ARE LEFT UNDER THIS HEATER WHILE IN USE THEY WILL BE SUBJECT TO RADIANT HEAT AND COULD BE SERIOUSLY DAMAGED. This heater is to be ...

Herunterladen

Geben Sie zwei Ziffern: